Capped off vacuum line
#1
Thread Starter
Senior Member
Joined: Jan 2018
Posts: 295
Likes: 24
From: Edmonton Area
2007 CLK550 Coupe, 2003 CL600, 2012
Capped off vacuum line
I noticed a vacuum line with a plug in it ty-wrapped to the engine on the passenger side rear of the engine. Could that be a vacuum line for diagnostics?
Anybody know?
Anybody know?
The following users liked this post:
biker349 (06-14-2019)
#3
Thread Starter
Senior Member
Joined: Jan 2018
Posts: 295
Likes: 24
From: Edmonton Area
2007 CLK550 Coupe, 2003 CL600, 2012
The following users liked this post:
biker349 (06-15-2019)
#6
not sure if you've solved this, but on the v8's there are two vacuum lines off the back of the upper intake manifold. one goes to the EGR valve, and on N/a m113 the other is usually capped off. i thnk its for testing, it will come in handy for me in case i ever need to get a intake manifold pressure reference in the future for mods
#7
Thread Starter
Senior Member
Joined: Jan 2018
Posts: 295
Likes: 24
From: Edmonton Area
2007 CLK550 Coupe, 2003 CL600, 2012
I read somewhere what it was, but forgot already. Must not have been too important at the time.
The diagram pmercury put up shows the vacuum system. Looks like number 160.
The diagram pmercury put up shows the vacuum system. Looks like number 160.
Last edited by Kelvin Bellrose; 06-30-2019 at 04:50 PM.
Trending Topics
#10
I REPEAT
You can not repair these cars in about 50% of the case
if you don't have the BASE of software tools and Sdconnect
the car is mega-ful of modules that are and can be programmed
pm me for directions
You can not repair these cars in about 50% of the case
if you don't have the BASE of software tools and Sdconnect
the car is mega-ful of modules that are and can be programmed
pm me for directions