CL-Class (W215) 2000-2006: CL 500, CL 600

PSE Programming after replacement?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 06-02-2020 | 10:44 AM
  #1  
was55amg's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2019
Posts: 15
Likes: 1
CL500 W215
PSE Programming after replacement?

....

Last edited by was55amg; 06-08-2020 at 09:26 AM. Reason: ....
Old 06-02-2020 | 04:45 PM
  #2  
Plutoe's Avatar
Out Of Control!!
Veteran: Army
 
Joined: Feb 2011
Posts: 14,804
Likes: 1,065
From: Shepardstown, WV
1999 E300TD
That assumes the replaced part was new and ddi not have firm ware installed. Your issue is if the pump came from your vehicle type,there should not be an issue!
Old 06-02-2020 | 05:52 PM
  #3  
pmercury's Avatar
member
iTrader: (2)
 
Joined: Oct 2016
Posts: 3,093
Likes: 796
CL
Originally Posted by was55amg
Hello,

I have been working on my trunk not opening or closing using either the remote, trunk switch or interior switch. I have browsed the whole internet and checked all the fuses, wires, pneumatic lines etc....I have even got another PSE pump that I replaced, the result is the same: The trunk won't open. All the other functions related to the PSE work (soft close, lock/unlock, etc...). I have the W215 Mercedes mechanic manual and it says that after replacing the PSE pump, version coding must be done via STAR Diagnosis. (see attached).

I would have to go to the dealer for that but was wondering if any of you can confirm this would be the fix for the trunk to work?

Thanks
Only Xentry will tell you
Old 06-02-2020 | 08:06 PM
  #4  
meadows222's Avatar
Member
 
Joined: May 2016
Posts: 103
Likes: 28
From: Mississippi
'02 CL500, '05 SL55 AMG, '00 SL500, '83 380SL, '15 S550 Coupe
After all that, did you actually look at the trunk latching/locking mechanism?

Lots of opportunity for leaks there and is a common issue.
Old 06-04-2020 | 05:58 PM
  #5  
was55amg's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2019
Posts: 15
Likes: 1
CL500 W215
Thanks guys. Will update soon

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: PSE Programming after replacement?



All times are GMT -4. The time now is 08:51 AM.