CL-Class (W215) 2000-2006: CL 500, CL 600

Cl500 , soft close , boot , central locking , rear lights not working

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 08-28-2021, 05:42 AM
  #1  
Newbie
Thread Starter
 
Nabz91's Avatar
 
Join Date: Aug 2021
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Cl500 2001
Cl500 , soft close , boot , central locking , rear lights not working

Hi all , I’m hoping someone can help with these problems .

Not working ;
Rear lights
Seat locking left and right front
Central locking
Soft close
Boot release
Light washers at front
Rear quarter windows not sliding up after door is closed

Have tested PSE unit both in and out of car , in the car it operates for a lengthy amount of time on its own at times , then shuts off and tries again , outside of the car , motor sucks and blows air , valves open and close.

My rear Sam module I have no communication with it via my scanner

I have error codes for my two front sams and a whole bunch of codes for my PSE unit

have tried replacing fuse , battery etc all the basics .

I have an error message on my cluster saying my seats left and right are not locked.

no error messages for my lights or anything else

also at times the ABC warning comes up saying car is too low , I then raise it and it’s fine , but every now and then it just drops whilst the car is on .

Any help with this matter would be appreciated
cheers
kind regards
nabz

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Cl500 , soft close , boot , central locking , rear lights not working



All times are GMT -4. The time now is 02:21 PM.