Display on cluster is weak
#1
Super Member
Thread Starter
Display on cluster is weak
Hey guys the display on the center screen on the instrument cluster is sometimes unreadable.. I am not sure if this is a light senor problem or if this happens before it completely goes out.
Sometimes it works fine and other times it does not.
I found the part on ebay, could it just be swapped out?
Thanks!
Sometimes it works fine and other times it does not.
I found the part on ebay, could it just be swapped out?
Thanks!
The following users liked this post:
biker349 (03-10-2022)
#3
Super Member
Join Date: May 2021
Location: Netherlands
Posts: 528
Received 138 Likes
on
126 Posts
CL 600 '00 5.8L V12
I think that if it where a light sensor problem, the whole cluster would have dimmed.
It might be the zebra strips (I assume that those are used) that connect the PCB to the LCD.
I think they can get bad as a result of the high temperatures/temperature variations
It might be the zebra strips (I assume that those are used) that connect the PCB to the LCD.
I think they can get bad as a result of the high temperatures/temperature variations
The following users liked this post:
biker349 (03-16-2022)