Help..help..Help Dynamic Seats
Thread Starter
Junior Member
Joined: Feb 2012
Posts: 22
Likes: 0
From: United Arab Emirates - DUBAI
2007 CL500 W216
Help..help..Help Dynamic Seats
Hi all, please I need your help, whenever im changing my dynamic seats settings like lumber support or shoulders or anything else it goes back to 0 (zero) i. A second, for both driver and passenger side seats, seas are moving properly but only the dynamic function while driving and ba k support are not working, my car is 2007 CL500 W216,,,, please help me where to start!!!!!!
Senior Member
Joined: Oct 2006
Posts: 379
Likes: 3
From: Southcoast England
CL500 216
The valves in the valve block get problems, when this happens this function will get turned off, so you try and set it and it just does not store and goes blank.
The CAN turns this function off to avoid damage to the seat or pump, yes you can re set on STAR, but if a fault not fixed it will turn off again shortly
The CAN turns this function off to avoid damage to the seat or pump, yes you can re set on STAR, but if a fault not fixed it will turn off again shortly
