CL-Class (W216) 2007-Present: CL 500, CL 600

Least invasive way to upgrade exhaust noise on CL500 (W216)

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 06-24-2015 | 06:11 AM
  #1  
salis's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2015
Posts: 22
Likes: 0
CL500 2008 W216
Least invasive way to upgrade exhaust noise on CL500 (W216)

Hi guys,

I recently bought a 2008 CL500 - it is an amazing car but the only thing I miss is a nice exhaust noise that sounds a bit more like V8. I had a M6 and have driven the CL63 AMG and I love the sound of those. I have done my research and know that I can do a couple of things - replace resonator with X-pipe, change entire exhaust system, etc. I would do all of these, but my main concern is resale value of the car. Would it drop, if I do any changes to the exhaust? What is the least invasive method I can use to upgrade my exhaust noise, without impacting the resale value of the car?

In particular, I have been looking at the following (I am based in London):
- Replacing resonator (and possible also second cats) with an X-pipe Link
- Installing new exhaust tailpipes/silencers (are these the same?) Link

Which will produce the best results? I do not want my car to be extremely noisy, but would like to have an exhaust noise similar to CL63 AMG. Again, the less invasive, the better, as I do not want to impair resale value.

Thanks a lot!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Least invasive way to upgrade exhaust noise on CL500 (W216)



All times are GMT -4. The time now is 08:03 PM.