CL600 Engine code 20CE
#1
Junior Member
Thread Starter
CL600 Engine code 20CE
Hi everybody,
my CL600 sometimes does not feel like its delivering full power and when STAR is plugged in this is the code that appears:
20CE Self-adaption of mixture formation is at the limit value (at upper end of partial load range)
Once this is deleted the full power returns but eventually the code returns.
The CL is serviceed, with new coil packs, voltage transformer and spark plugs, returns 18.5 mpg and is run on 99 ron shell V-power petrol.
The car has been re mapped by DMS in southampton.
Any advice would be greatly appreciated.
Alex
my CL600 sometimes does not feel like its delivering full power and when STAR is plugged in this is the code that appears:
20CE Self-adaption of mixture formation is at the limit value (at upper end of partial load range)
Once this is deleted the full power returns but eventually the code returns.
The CL is serviceed, with new coil packs, voltage transformer and spark plugs, returns 18.5 mpg and is run on 99 ron shell V-power petrol.
The car has been re mapped by DMS in southampton.
Any advice would be greatly appreciated.
Alex