55 with ELM V2 questions
Thread Starter
Senior Member
Joined: Jan 2013
Posts: 495
Likes: 47
From: south shore
12' E559
55 with ELM V2 questions
i just finished installing the V2 with remote...to start my fronts have stock links, my rears have adjustable, didn't get time to finish fronts.
will this affect the ELM and remote?
I have the typical; rear is set to lower on remote but it raises. ok, so i switched the 2 wires.....i thought i broke my strut it shot up so fkn high...clearly the 2 wires i switch didn't do jack???
My fronts lower just perfect using the remote again their on stock links.
So what's going on, is the rear wiring somehow wrong?
Is the car getting "confused" being that only the rear are on adjustable links?
and the manual didn't have anything on the remote, and im still lost as to what the "function" switch does on the ELM module?
And for those with links,V2 . What are you making the links lengthwise, what # are your knobs at on the ELM module?
will this affect the ELM and remote?
I have the typical; rear is set to lower on remote but it raises. ok, so i switched the 2 wires.....i thought i broke my strut it shot up so fkn high...clearly the 2 wires i switch didn't do jack???
My fronts lower just perfect using the remote again their on stock links.
So what's going on, is the rear wiring somehow wrong?
Is the car getting "confused" being that only the rear are on adjustable links?
and the manual didn't have anything on the remote, and im still lost as to what the "function" switch does on the ELM module?
And for those with links,V2 . What are you making the links lengthwise, what # are your knobs at on the ELM module?
Last edited by Blkvip; Sep 14, 2013 at 10:44 PM.
MBworld Guru
Joined: May 2006
Posts: 2,345
Likes: 10
From: Irvine
04 CL55, 05 E500S4, 15 BMW i3 REx
i just finished installing the V2 with remote...to start my fronts have stock links, my rears have adjustable, didn't get time to finish fronts.
will this affect the ELM and remote?
I have the typical; rear is set to lower on remote but it raises. ok, so i switched the 2 wires.....i thought i broke my strut it shot up so fkn high...clearly the 2 wires i switch didn't do jack???
My fronts lower just perfect using the remote again their on stock links.
So what's going on, is the rear wiring somehow wrong?
Is the car getting "confused" being that only the rear are on adjustable links?
and the manual didn't have anything on the remote, and im still lost as to what the "function" switch does on the ELM module?
And for those with links,V2 . What are you making the links lengthwise, what # are your knobs at on the ELM module?
will this affect the ELM and remote?
I have the typical; rear is set to lower on remote but it raises. ok, so i switched the 2 wires.....i thought i broke my strut it shot up so fkn high...clearly the 2 wires i switch didn't do jack???
My fronts lower just perfect using the remote again their on stock links.
So what's going on, is the rear wiring somehow wrong?
Is the car getting "confused" being that only the rear are on adjustable links?
and the manual didn't have anything on the remote, and im still lost as to what the "function" switch does on the ELM module?
And for those with links,V2 . What are you making the links lengthwise, what # are your knobs at on the ELM module?
MBWorld Fanatic!
Joined: Jun 2009
Posts: 1,559
Likes: 79
2015 Challenger Hellcat, 2023 Ram 3500, 2005 E55 Wagon, 2019 GLC63s
