HELP - 2005 CL65 Drivers Side and Rear Window Not Sealing Fully Upon Shut-Off
Thread Starter
Junior Member
Joined: Apr 2015
Posts: 40
Likes: 6
From: North Carolina
2005 CL65 AMG
HELP - 2005 CL65 Drivers Side and Rear Window Not Sealing Fully Upon Shut-Off
Got in the car today and slammed the door ... usually I just pull the door close and it is then automatically pulled shut and windows seal up and against each other. When I went to get out, I pulled on the handle, the windows did their customary slight drop and pull apart and I got out. But when I gently closed the door, the windows did not move back into place leaving a slight opening at the top of the window.
I checked and the passenger side and rear side windows work normal.
I am fairly certain I am not the first to find this problem - anyone else experience this and if so, what did you do.
Thanks in advance.
Chris
I checked and the passenger side and rear side windows work normal.
I am fairly certain I am not the first to find this problem - anyone else experience this and if so, what did you do.
Thanks in advance.
Chris
Member
Joined: Feb 2015
Posts: 148
Likes: 7
From: St. Paul, MN
Speedriven CL600 V12TT
If it's not normalizing the windows, then you have a far worse problem on your hands. Roll your window all the way down, then hold it for 5 seconds or so until you hear a faint click. Do the same thing when rolling it back up. Hopefully that should fix it.
MBWorld Fanatic!
Joined: Mar 2005
Posts: 1,032
Likes: 77
From: Wash. D.C.
'20 S63
If this doesn't fix it then it may be the Door Control Module.
