When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello there,
I'm in the process of removing/replacing spark pkug ane valve cover gasket. During the procedure the Intercooler must be out of the way.....long for shot. The passenger side intercooler has 2 rubbers hoses. The one on the back i know where it goes to....but the front i could not seem to figure it out. Please help. Attached is the passenger ic that i removed. The black rubber hose in the pics is what im asking to see where its connection is or it just hangs lose.
Hello there,
I'm in the process of removing/replacing spark pkug ane valve cover gasket. During the procedure the Intercooler must be out of the way.....long for shot. The passenger side intercooler has 2 rubbers hoses. The one on the back i know where it goes to....but the front i could not seem to figure it out. Please help. Attached is the passenger ic that i removed. The black rubber hose in the pics is what im asking to see where its connection is or it just hangs lose.
Look inside the hose. You broke the nipple off inside it. It's goes to a pressure sensor that is mounted on the passengers side of the ignition module that is bolted to the center area of the engine. It is bolted onto a bracket thats attached to the ignition module in the center of engine.
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
