CL65 Carbon Fiber Rear Diffuser
#602
Former Vendor of MBWorld
#603
Former Vendor of MBWorld
#604
Junior Member
OK guys, here are my pics of my installed diffuser. I have posted more pics of my baby in the pics thread.
After I finished the installation I made the following findings;
1. Affect to performance because of extra weight of the diffuser = 0%
2. Downforce produced by the diffuser = 0%.
3. Grin factor each time you look at that rear end now = 100%
4. Uplift factor to overall appearance of the vehicle = 100%
After I finished the installation I made the following findings;
1. Affect to performance because of extra weight of the diffuser = 0%
2. Downforce produced by the diffuser = 0%.
3. Grin factor each time you look at that rear end now = 100%
4. Uplift factor to overall appearance of the vehicle = 100%
#605
Member
Join Date: Dec 2009
Location: Smithville, Missouri
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
2003 CL55
OK guys, here are my pics of my installed diffuser. I have posted more pics of my baby in the pics thread.
After I finished the installation I made the following findings;
1. Affect to performance because of extra weight of the diffuser = 0%
2. Downforce produced by the diffuser = 0%.
3. Grin factor each time you look at that rear end now = 100%
4. Uplift factor to overall appearance of the vehicle = 100%
After I finished the installation I made the following findings;
1. Affect to performance because of extra weight of the diffuser = 0%
2. Downforce produced by the diffuser = 0%.
3. Grin factor each time you look at that rear end now = 100%
4. Uplift factor to overall appearance of the vehicle = 100%
AMG055,
The diffuser looks really !
The exhaust on the passenger side looks like it needs to be centered in the opening ? Is it just the photo ?
#606
Junior Member
#607
Senior Member
Yes, no need to take the diffuser off. Just put the screw, I would use 2. Right above the exhaust tips. Like Kens installer did. However, he only put 1 there. But I would use 2. Just press the diffuser flush, then drill the hole and put a self tapping screw in, or a nut and bolt. Droping the exhaust may be required to do this.
The screws I used were Black AuvecoPak AP11792 #10x1" Tapping Screws. Just pre-drill with smaller tiny bit to start the hole, then use bit slightly smaller then Tapping screw for final hole.
I did do a search for other Black AuvecoPak Tapping screws and they also have #10x3/4 and the smaller #8x3/4; which might be better. #10x1" is a bit long.
I put in two screws spaced evenly on each side as suggested.
Love the look, ain't going back..
Last edited by NRL; 11-14-2011 at 12:01 PM.
#613
Former Vendor of MBWorld
#621
Member
Has anyone had this happen or seen this on their diffuser, mine has only been on for a few weeks and I see the discoloration, tried a spit clean as I just noticed this yesterday but it is not from a scratch and the surface feels smooth seems like it may be inside the clear coat.
#622
Member
Has anyone seen this discoloration on their diffuser, just noticed yesterday, tried a little spit but still there gonna do a better inspection today.
https://picasaweb.google.com/1093763...88187591089250
https://picasaweb.google.com/1093763...88187591089250
#623
Banned
Join Date: Nov 2008
Posts: 1,357
Likes: 0
Received 3 Likes
on
3 Posts
MB; 55KCL AMG, SL550 SLS AMG G500 Cabrio 280SL ML350 CLS550 ML500 E55 AMG CL500 S600 SLK32 AMG
Has anyone seen this discoloration on their diffuser, just noticed yesterday, tried a little spit but still there gonna do a better inspection today.
https://picasaweb.google.com/1093763...88187591089250
https://picasaweb.google.com/1093763...88187591089250
#624
Member
#625
Could you please email me the pictures and your name so that I may look up your order. I am also assuming that this was purchased directly from Euroteck?
sales@euroteckmotorsports.com
thank you
sales@euroteckmotorsports.com
thank you