---HG Motorsports--- CLA250 Track Spec Build
01-29-2014, 07:59 PM
#1
Former Vendor of MBWorld
Thread Starter
Join Date: Jan 2007
Location: La Jolla
Posts: 414
Likes: 0
Received 1 Like
on
1 Post
'92 300E, '06 E55
---HG Motorsports--- CLA250 Track Spec Build
2014 CLA250 Track Spec
Ours stated out as the base model with no options.
First step was to replace the stock wheels with a set of HRE Flowforms, wrapped in Toyo Tires
Next we took the car to Modern Image, for tint, and a wrap in our digital camo that showcased our sponsor vendors.
HRE Wheels, Recaro, Brembo, Toyo Tires, Motul, Chapparone auto body, and Modern Image
The next step, breakdown the car and add some goodies
First was to add the KW Variant3 suspension all around. We were honored to receive the first us spec set for the car directly from KW Germany.
Next step we swapped out the undersized stock rotors and calipers for the Brembo Gran Turismo 6-Piston Monoblock and 2-Piece Drilled rotor front kit.
Adding the Brembo to the front created clearance issue with the stock offset so we had to add spacers
The stock sound of the car was quiet and did not have any kick. With the car lowered and stopping very well, we hand-built an exhaust system.
Our in house Master Fabricators also added a one off titanium tip to the system.
Finally we dressed up the inside using Recaro Sportster CS seats with “HG Motorsports plaid” inlay by Autobahn Interiors. Because we also intend on taking this car to the track we also added a 4-Point bolt in roll bar.
-----Available now-----
US spec KW Coilovers
Brembo Brakes
HRE Flowform wheels
Toyo Tires
Recaro
Sabelt
-----Under Development-----
Plug and Play Tuning Module
Performance Intake
Turbo/Cat Back Exhaust
Performance Intercooler
Turbo Upgrade
Engine Dampener
Brake Rotor Kit
For more information and availability
Email: sales@hgmotorsports.com
Phone: 619.504.8140
HG Motorsports
instagram @hgmotorsports
http://www.facebook.com/HGMotorsports
Ours stated out as the base model with no options.
First step was to replace the stock wheels with a set of HRE Flowforms, wrapped in Toyo Tires
Next we took the car to Modern Image, for tint, and a wrap in our digital camo that showcased our sponsor vendors.
HRE Wheels, Recaro, Brembo, Toyo Tires, Motul, Chapparone auto body, and Modern Image
The next step, breakdown the car and add some goodies
First was to add the KW Variant3 suspension all around. We were honored to receive the first us spec set for the car directly from KW Germany.
Next step we swapped out the undersized stock rotors and calipers for the Brembo Gran Turismo 6-Piston Monoblock and 2-Piece Drilled rotor front kit.
Adding the Brembo to the front created clearance issue with the stock offset so we had to add spacers
The stock sound of the car was quiet and did not have any kick. With the car lowered and stopping very well, we hand-built an exhaust system.
Our in house Master Fabricators also added a one off titanium tip to the system.
Finally we dressed up the inside using Recaro Sportster CS seats with “HG Motorsports plaid” inlay by Autobahn Interiors. Because we also intend on taking this car to the track we also added a 4-Point bolt in roll bar.
-----Available now-----
US spec KW Coilovers
Brembo Brakes
HRE Flowform wheels
Toyo Tires
Recaro
Sabelt
-----Under Development-----
Plug and Play Tuning Module
Performance Intake
Turbo/Cat Back Exhaust
Performance Intercooler
Turbo Upgrade
Engine Dampener
Brake Rotor Kit
For more information and availability
Email: sales@hgmotorsports.com
Phone: 619.504.8140
HG Motorsports
instagram @hgmotorsports
http://www.facebook.com/HGMotorsports
02-03-2014, 02:36 PM
#2
Former Vendor of MBWorld
Thread Starter
Join Date: Jan 2007
Location: La Jolla
Posts: 414
Likes: 0
Received 1 Like
on
1 Post
'92 300E, '06 E55
As part of our constant testing we push every change to assure it has an increased in performance.
Last weekend we tested at the San Diego Region SCCA Auto-X.
With the Us Spec KW Variant 3's the car handled exceptionally well around the course.
The KW Variant 3 is available for the CLA250. As far as the CLA45 AMG we are waiting for the first US Spec to be sent to us.
Last weekend we tested at the San Diego Region SCCA Auto-X.
With the Us Spec KW Variant 3's the car handled exceptionally well around the course.
The KW Variant 3 is available for the CLA250. As far as the CLA45 AMG we are waiting for the first US Spec to be sent to us.
