W210 / W208 Big Brake Kit 14.1" STOPTECH
These brakes are boxed and ready to be sold. I'm Looking to get 1,500 for them. I'm Located in So cali so if your close we can meet up. If not you pay for shipping.
Trending Topics
I live in anaheim. You can come check it out and pick it up if you like.
The Best of Mercedes & AMG
Thanks,
Rob
note that they will not fit well if you have custom rims (HRE/Iforged/DPE etc...) made for brembo brakes, unless you have them made per these brakes specs (brembo spec offset+12mm wider). The rotor hats are 12mm wider than standard stoptechs. But they work fine with many wheels, you just gotta be sure of your wheels sizes.
I have Moven brabus VI 8.5inch wide in the front and they worked perfect, then I had Moven brabus V 8.5 inch widein the front and same thing, no problem, but w/ my IForged wheels, 8" front and wrong offset, it made my rub bad and pushed the wheel outward too much. I didn't know that these rotors hat were custom made to be 12mm wider than normal until after I sold them to supratt. I don't mean to butt in your sale, but I just want people to be well informed in case they have custom wheels like us.
50cents look like you have movens, so that should be no problem whatsoever. You could even use a 2mm spacer if needed, but I cleared just fine at 1mm w/o spacer.
And if you just want to sell the brakes back to me, I'll take them for 800 and meet you in Ventura again.
note that they will not fit well if you have custom rims (HRE/Iforged/DPE etc...) made for brembo brakes, unless you have them made per these brakes specs (brembo spec offset+12mm wider). The rotor hats are 12mm wider than standard stoptechs. But they work fine with many wheels, you just gotta be sure of your wheels sizes.
I have Moven brabus VI 8.5inch wide in the front and they worked perfect, then I had Moven brabus V 8.5 inch widein the front and same thing, no problem, but w/ my IForged wheels, 8" front and wrong offset, it made my rub bad and pushed the wheel outward too much. I didn't know that these rotors hat were custom made to be 12mm wider than normal until after I sold them to supratt. I don't mean to butt in your sale, but I just want people to be well informed in case they have custom wheels like us.
50cents look like you have movens, so that should be no problem whatsoever. You could even use a 2mm spacer if needed, but I cleared just fine at 1mm w/o spacer.
And if you just want to sell the brakes back to me, I'll take them for 800 and meet you in Ventura again.
Hey Godfather, you mentioned that it wouldnt fit on a I-forged 8..but i got the aero model with 19 x 9 front and Rear is 19 X 10. would that also be a problem.
These brakes are boxed and ready to be sold. I'm Looking to get 1,500 for them. I'm Located in So cali so if your close we can meet up. If not you pay for shipping.
better to sell to me buddy!!!
how many miles have you already used those BBK??
email me please felix@euro-passion.com
thnx
Best Regards
Felix







