WTB: W203 5mm H&R spacers
MBWorld Fanatic!
Joined: Nov 2004
Posts: 1,143
Likes: 3
From: Sydney, Australia
2017 S63 Coupe Iridium Silver
Originally Posted by SEXSPHERE
H&R hubcentric is what im looking for. Pm me if you got one for sale. Thanks.
They can only be used on the rear axle as the front axle has a shallower hub-centric flange , which almost disappears once the spacer is on. Then you hang your wheel on the lug bolts which are never 100% hubcentric.
H&R only makes hubcentric spacers 10mm and over as there is no way to machine the centre flange out of a thinner billet.
And do i need to get longer bolts?
Banned
Joined: Jun 2003
Posts: 419
Likes: 0
From: Valencia, CA
C230 SS
Yes for the front, it will cause vibration if they are not hub centric. I currently have spacers only in the rear. Depending on the offset, determines if you need longer lugs. For me I used the spacers in the rear because the stock lugs were too long, even though I did not need spacers for the rims. The H&R set I have is hubcentric.
Thread Starter
Super Member
Joined: Aug 2005
Posts: 746
Likes: 0
From: Toronto, Canada
//WALD C320 Magnifique [sold], BMW Z4 3.0i 6spd[sold]
Originally Posted by CSportAnt
Yes for the front, it will cause vibration if they are not hub centric. I currently have spacers only in the rear. Depending on the offset, determines if you need longer lugs. For me I used the spacers in the rear because the stock lugs were too long, even though I did not need spacers for the rims. The H&R set I have is hubcentric.
