FS: Kleeman Boost upgrade K23 kit
02-21-2006, 04:24 PM
#28
MBWorld Fanatic!
Join Date: Jan 2006
Location: Pasadena, CA
Posts: 3,206
Likes: 0
Received 6 Likes
on
5 Posts
2002 C230K, 2013 BMW 328, 2015 BMW X5
I'm the buyer!
Yep! I'm the lucky guy.
Just pm'd you the tracking number of the payment.
I called House of Power in Huntington Beach CA. I spoke to Josh who is going to install the kit, and I'm going with a Colder Copper Plug. I decided to get before and after dyno runs to substantiate the power gains.
I'll post the info and slips in the W203 forum when its all done.
Looking forward to getting it all put together.
Ed
Just pm'd you the tracking number of the payment.
I called House of Power in Huntington Beach CA. I spoke to Josh who is going to install the kit, and I'm going with a Colder Copper Plug. I decided to get before and after dyno runs to substantiate the power gains.
I'll post the info and slips in the W203 forum when its all done.
Looking forward to getting it all put together.
Ed
02-21-2006, 09:56 PM
#29
Member
Thread Starter
Join Date: Nov 2004
Location: Orange County, CA
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
2002 c230K Coupe
Awesome!
Very curious to see the results. Of course Kleemanns Hp and torque claims are power to the crank. But I definately want to know what it is gonna be putting down at the wheels.
I really wish I had the opportunity to run this on my car, but at least you get to enjoy it!
Are you running any type of high flow intake filter? Exhaust system? Adding both of those will help with the flow in and out. Also, if you really want to have a trick setup, I was gonna install the pulley, and add aquamist water injection.
With the blower boosting 11 psi, it creates alot of friction which in turn produces heat. Well heat is no helper to horse power. The aquamist system will spray a fine mist of water to cool the air down. many in the racing scene use 50% distilled water, and 50% alcohol. The alcohol increases the octane in the air/fuel mixture producing even more power, and a cleaner spark.
Sorry for rambling on and on, just wanted to let you know what my plans were.
Very curious to see the results. Of course Kleemanns Hp and torque claims are power to the crank. But I definately want to know what it is gonna be putting down at the wheels.
I really wish I had the opportunity to run this on my car, but at least you get to enjoy it!
Are you running any type of high flow intake filter? Exhaust system? Adding both of those will help with the flow in and out. Also, if you really want to have a trick setup, I was gonna install the pulley, and add aquamist water injection.
With the blower boosting 11 psi, it creates alot of friction which in turn produces heat. Well heat is no helper to horse power. The aquamist system will spray a fine mist of water to cool the air down. many in the racing scene use 50% distilled water, and 50% alcohol. The alcohol increases the octane in the air/fuel mixture producing even more power, and a cleaner spark.
Sorry for rambling on and on, just wanted to let you know what my plans were.
