FS: Carlsson RS Coilovers for W203 C32
Thread Starter
Super Member
Joined: Dec 2003
Posts: 815
Likes: 2
This is the RS coilover suspension system based on the Bilstein PSS-9 platform. Eibach springs are used instead of H&R at a different spring rate than the bilsteins as well as somewhat different strut/shock valving. They are monotube inverted shaft design whose springs fit in factory locations and utilize the front upper bearing mount. They are adjustable in compression and rebound with a single 9 position control knob with 1 being firmest and 9 being softest. Ride height can be adjusted front and rear. The car is set at the perfect height for street clearance and the car was corner balanced at this height. Drop is approximately 1.5 - 1.75" in front and 1" in rear, or 13.25" from front fender lip to center of hub, and 12.5" from rear fender lip to center of hub. Selling at $1,000.00. A few people have already shown interest, but I will put you on the list. Buyer pays shipping.
Newbie
Joined: Apr 2007
Posts: 2
Likes: 0
