FS W210 Eibach Sport Springs
#1
Junior Member
Thread Starter
Join Date: Sep 2006
Location: Los Angeles, CA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
E300 Turbodiesel
FS W210 Eibach Sport Springs
BARELY used (literally less than 500 miles), I have a E300 diesel and the front was too low due to the extra weight of my engine so I went back to stock. I have these Eibach springs which will fit any W210 model including E55(besides the E300TD)
PM me with offers...
CHRIS
PM me with offers...
CHRIS
#2
MBWorld Fanatic!
Join Date: Mar 2003
Location: SFV, SoCal
Posts: 5,544
Likes: 0
Received 1 Like
on
1 Post
'04 Silverado Z71 - sold all my Benzes and need another!
BARELY used (literally less than 500 miles), I have a E300 diesel and the front was too low due to the extra weight of my engine so I went back to stock. I have these Eibach springs which will fit any W210 model including E55(besides the E300TD)
PM me with offers...
CHRIS
PM me with offers...
CHRIS
#3
Junior Member
Thread Starter
Join Date: Sep 2006
Location: Los Angeles, CA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
E300 Turbodiesel
Eibach Part #RU 2536 on the front springs...
I wasn't aware there were different models for the W210... Here are some other numbers off the coils : KBA 90511, EW 2536001 VA
#4
MBWorld Fanatic!
Join Date: Mar 2003
Location: SFV, SoCal
Posts: 5,544
Likes: 0
Received 1 Like
on
1 Post
'04 Silverado Z71 - sold all my Benzes and need another!
Hey Chris, I did some research and found that Eibach only makes one set of springs for V6 and V8 (H&R makes 2). So, how low were you and what size spring pads were you running? Eibach claims to only lower 1.2" and that shouldn't have made you too low. Please let me know. Thanks!
#5
Junior Member
Thread Starter
Join Date: Sep 2006
Location: Los Angeles, CA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
E300 Turbodiesel
that's what i thought initially...
the front was really low, not obnoxious but probably "H&R low". i've seen other W210's (both V6 and V8) that have the same springs and they were almost an inch higher... this is because the diesel engine is cast iron block and much heavier than both V6 and V8 engines.
Hey Chris, I did some research and found that Eibach only makes one set of springs for V6 and V8 (H&R makes 2). So, how low were you and what size spring pads were you running? Eibach claims to only lower 1.2" and that shouldn't have made you too low. Please let me know. Thanks!