![[180]'s Avatar](data:image/svg+xml;utf8,<svg xmlns='http://www.w3.org/2000/svg' viewBox='0 0 50 50'><circle class='avatar-circle-default' fill='%234f9e60' cx='25px' cy='25px' r='20px'></circle><text class='avatar-text-default' x='49%' y='53%' fill='white' text-anchor='middle' alignment-baseline='middle'>[</text></svg>)
FS: AMG Engine cover and Airbox Silver
Thread Starter
MBWorld Fanatic!
Joined: May 2006
Posts: 1,486
Likes: 4
From: San Antonio, Tx
2000 CLK430
FS: AMG Engine cover and Airbox Silver
Hey, I purchased a nice silver AMG engine cover and airbox hoping it would fit directly on my CLK430. Its pretty close, but I don't have time to alter it, so I'm leaving it to you guys. I'm in Augusta, Ga but I'll ship it if buyer pays shipping. It came from a 5.5L (amg 55 model) engine. Intake is round. I only have one tube that runs from the front of the car to the airbox. The other ope shouldn't cost too much to buy. It has some air filters in it. I haven't opened it up, so I don't know if they're factory or not, or how new they are. Looks great, in good shape, few minor scratches. A clip is broken where the lower piece attaches to the airbox/cover, but it still fits fine. The other 3 are fine, so it holds with no problem. PM me or call with offers. You'll like it! Just wish I had more time to fool with it
Oh yeah 200 OBO plus shipping
Also selling a W209 steering wheel: https://mbworld.org/forums/showthrea...15#post2510215
Greg
Oh yeah 200 OBO plus shipping
Also selling a W209 steering wheel: https://mbworld.org/forums/showthrea...15#post2510215
Greg
Last edited by gregory13lil; Nov 30, 2019 at 06:04 AM.
Thread Starter
MBWorld Fanatic!
Joined: May 2006
Posts: 1,486
Likes: 4
From: San Antonio, Tx
2000 CLK430
I have added a pic of the part that needs to be modified. this part overhangs onto my W208's fan shroud and needs to be modded a little shorter. It would be easy for a fiberglass shop to do it. And it would be the only one out there I think with this cover. Also the tubes that connect to the front of the car would have to be modded what I was going to do was cut off the connection on the W208 and put it on the end of the new one. All in all it was an awesome idea but not enough cash and time so most of my projects have to go.
Thread Starter
MBWorld Fanatic!
Joined: May 2006
Posts: 1,486
Likes: 4
From: San Antonio, Tx
2000 CLK430
Greg
MBWorld Fanatic!
Joined: May 2003
Posts: 1,197
Likes: 75
From: USA
18 G550, 24 EQB3504M
did your oil filter fit in the right spot with that airbox?
I know the 208 55's oil filter is offset slightly due to what looks like a heat sink / oil cooler type setup attached to it.
Also you mentioned that one of the tabs is broken, is it one of the tabs that holds the top and bottom part together?
Does this use hex screws like the 208 CLK55's airbox to hold the top and bottom part together or does it use metal spring clamps like most other airboxes?
Cheers
I know the 208 55's oil filter is offset slightly due to what looks like a heat sink / oil cooler type setup attached to it.
Also you mentioned that one of the tabs is broken, is it one of the tabs that holds the top and bottom part together?
Does this use hex screws like the 208 CLK55's airbox to hold the top and bottom part together or does it use metal spring clamps like most other airboxes?
Cheers
Last edited by Holson; Nov 19, 2007 at 11:25 AM.
Trending Topics
Thread Starter
MBWorld Fanatic!
Joined: May 2006
Posts: 1,486
Likes: 4
From: San Antonio, Tx
2000 CLK430
did your oil filter fit in the right spot with that airbox?
I know the 208 55's oil filter is offset slightly due to what looks like a heat sink / oil cooler type setup attached to it.
Since I have recieved lots of questions about fitting this onto a 430 I will take a pic with it on so you can see the fitment of everything.
Also you mentioned that one of the tabs is broken, is it one of the tabs that holds the top and bottom part together?
Yes, the tab that is broken is the one that hold the top to the bottom but it stays on there securely die to the other tabs. I am sure that an easy fix can be made for this.
Does this use hex screws like the 208 CLK55's airbox to hold the top and bottom part together or does it use metal spring clamps like most other airboxes?
No it does not use HEX it just clips on.
Cheers
I know the 208 55's oil filter is offset slightly due to what looks like a heat sink / oil cooler type setup attached to it.
Since I have recieved lots of questions about fitting this onto a 430 I will take a pic with it on so you can see the fitment of everything.
Also you mentioned that one of the tabs is broken, is it one of the tabs that holds the top and bottom part together?
Yes, the tab that is broken is the one that hold the top to the bottom but it stays on there securely die to the other tabs. I am sure that an easy fix can be made for this.
Does this use hex screws like the 208 CLK55's airbox to hold the top and bottom part together or does it use metal spring clamps like most other airboxes?
No it does not use HEX it just clips on.
Cheers
Greg
MB World Stories
The Best of Mercedes & AMG
6 Mercedes Models That Did NOT Age Well (But Are Somehow Still Cool)
Verdad Gallardo
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
Thread Starter
MBWorld Fanatic!
Joined: May 2006
Posts: 1,486
Likes: 4
From: San Antonio, Tx
2000 CLK430
Thread Starter
MBWorld Fanatic!
Joined: May 2006
Posts: 1,486
Likes: 4
From: San Antonio, Tx
2000 CLK430
It will fit your CLK perfectly without any mods cause it is a W209 which is what it came off of. I dont know if you will be able to use your original hoses though...I have a brand new one with the package so if the original doesnt fit then you just have to buy one air hose.
Greg
Greg
