Window Closing Issue
Thread Starter
Senior Member
Joined: Nov 2002
Posts: 270
Likes: 11
From: Arlington VA
'24 CLE 53
Window Closing Issue
Recently I discovered that upon closing my passenger door, the window fails to return to the sealed position. If I open the door in this condition the window sinks even lower and remains in that position. Anyone experience or hear of this happening on our CLE or any other MB car? With the car on, raising the window fully with the door closed works.
Thanks.
Thanks.
Member
Joined: Nov 2024
Posts: 85
Likes: 26
From: Houston
2025 CLE 53
Try doing a reset of the auto-close windows:
To reset your Mercedes auto-close windows, turn the ignition on, roll the window all the way down, and hold the button for at least 5 seconds after it's fully open. Then, roll the window all the way up and hold the button for at least 5 seconds after it closes. Repeat this procedure for each window that needs resetting
To reset your Mercedes auto-close windows, turn the ignition on, roll the window all the way down, and hold the button for at least 5 seconds after it's fully open. Then, roll the window all the way up and hold the button for at least 5 seconds after it closes. Repeat this procedure for each window that needs resetting
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
