Ooops (x2) : driving (city) light/wiring harness question...
#27
Originally Posted by rubberninja
King320:
Do you remember the name/type of thoose bulbs so i can go get a pair? I have blue angel eyes on my fogs and that color light would offset it perfectly The fogs look out of place with the yello light :
Do you remember the name/type of thoose bulbs so i can go get a pair? I have blue angel eyes on my fogs and that color light would offset it perfectly The fogs look out of place with the yello light :
Ninja,
Here's a post from a while back that I believe answers your question.
https://mbworld.org/forums/clk-class-w208/147211-since-light-bulbs-such-hot-topic-pics.html
Cheers,
Dominik
#28
Hey Midgetfinger, i just got it in today, does it matter which prong i shave down?
I also did everthing else in LED, Interior and LIcense plate, I will post pics tonight
George
I also did everthing else in LED, Interior and LIcense plate, I will post pics tonight
George
Originally Posted by midget fidger
yea the super ****e ba9 and 15-25 ohm load equalizers will work without any worning message. you can hook up the load equalizer in any positive/negative orientation and it will still work. i'm not sure about the 5 LED vs 4 LED, but i do know that the ba9s still had a blue tint to them even though they were "super white" bulbs. also know that you'll have to file down one of the prongs to get it to fit properly in the socket.
what dome lights? inside the car? dunno about those
what dome lights? inside the car? dunno about those
#30
It doesn't matter which prong you shave down, just be careful not to break the light. Hold it by the metal end only and don't twist the metal from the bulb...I broke one doing this
I got the 5led from autolumination.com but that was a while ago. I guess they changed the design and made the bulb part larger? I remember I had to wiggle it slightly to get it to go in.
I got the 5led from autolumination.com but that was a while ago. I guess they changed the design and made the bulb part larger? I remember I had to wiggle it slightly to get it to go in.
#31
all done!...i shaved down the LED and the prong....looks good.thanks for all the help!
Originally Posted by midget fidger
It doesn't matter which prong you shave down, just be careful not to break the light. Hold it by the metal end only and don't twist the metal from the bulb...I broke one doing this
I got the 5led from autolumination.com but that was a while ago. I guess they changed the design and made the bulb part larger? I remember I had to wiggle it slightly to get it to go in.
I got the 5led from autolumination.com but that was a while ago. I guess they changed the design and made the bulb part larger? I remember I had to wiggle it slightly to get it to go in.