W208 CEL on with bad hesitation at WOT??
06-24-2006, 01:17 PM
#1
Almost a Member!
Thread Starter
Join Date: Oct 2005
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
W208 CEL on with bad hesitation at WOT??
I have had the cel on for approximately 2 weeks now,when I first had it scanned it came up as either fuel codes/maf or o2 sensors.I put it off since I assumed it was faulty o2 sensors since thats most common & their was no difference in driveability,but the last few days when I accelerate it feels like im hitting a wall unless I deaccelerate any advice on what it is,maf?.
I will try to get codes again later.
I will try to get codes again later.
06-24-2006, 10:06 PM
#2
Member
Join Date: May 2006
Location: caribbean
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
clk 430
sounds like the Mass Air Flow meter!! ECU does not know how much fuel to inject ( air/fuel ratio ), can damage the o2 sensors 4 ea, converts also if not
attended to most tik!!!
attended to most tik!!!
06-25-2006, 12:36 AM
#3
Senior Member
I have a Mass Airflow meter (MAF) for sale. $100 + shipping. It should solve your problem if it's in fact the MAF. Unit is used but fine. Dealer replaced my MAF for a rough idle but that wasn't the problem that's why I have the extra one. PM me if interested.
Last edited by bs00clk; 06-25-2006 at 12:39 AM.
