Can't open hood - argh
#1
Member
Thread Starter
Join Date: Jun 2007
Location: way far awayyyyyy
Posts: 78
Likes: 0
Received 1 Like
on
1 Post
C207 E350C
Can't open hood - argh
Is there another way? I yanked and yanked on the release but it does nothing. Worked before. Might have to bring it to the dealer already
Also I did all the resets but when I pulled out the car barfed out some kind of clear, oily liquid, looks like from the passenger side. Maybe it was power steering fluid from the lock-to-lock reset? It drove and stopped (!) normally. Can't get under the hood to check anything.
Final miscue, durn radio code and I left the manual back home. Is ok just listening to the car and wishing for an Eisenmann race
![Frown](https://mbworld.org/forums/images/smilies/frown.gif)
Also I did all the resets but when I pulled out the car barfed out some kind of clear, oily liquid, looks like from the passenger side. Maybe it was power steering fluid from the lock-to-lock reset? It drove and stopped (!) normally. Can't get under the hood to check anything.
Final miscue, durn radio code and I left the manual back home. Is ok just listening to the car and wishing for an Eisenmann race
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Last edited by Pacific208; 10-06-2007 at 03:55 AM.
#2
Member
Thread Starter
Join Date: Jun 2007
Location: way far awayyyyyy
Posts: 78
Likes: 0
Received 1 Like
on
1 Post
C207 E350C
Actually, there's more
So I put the sunshade up (at night haha) and whipped the car up the hill to check the old scene. Dusted the car in back too but that's another story. On the way down still farting around with buttons and flopped the rear headrests (too cool!) but they snagged on the shade and yanked it off! LOL I fixed it after figuring those tracks out (if you've done this you know what this symbole ^ means hahaha!)
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)