bleeding cooling system
12-10-2011, 09:29 AM
#1
Newbie
Thread Starter
Join Date: Dec 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
2000 clk320
bleeding cooling system
Hey boys
I've just put a new water pump on my 2000 320 clk and seems I have an airlock at the pipe going through the firewall, .should I back the clamp off and see if that will help loose some air, or any other tricks , i've read a bunch of comments and tried squeazing the rad hose , I've got heat when I run it down the road but minimal at idle, help thanks
I've just put a new water pump on my 2000 320 clk and seems I have an airlock at the pipe going through the firewall, .should I back the clamp off and see if that will help loose some air, or any other tricks , i've read a bunch of comments and tried squeazing the rad hose , I've got heat when I run it down the road but minimal at idle, help thanks
