CLK-Class (W208) 1998-2002: CLK 200, CLK 230K, CLK 320, CLK 430 [Coupes & Cabriolets]

Shift Lever Assembly for CLK 320

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 02-23-2022, 05:05 PM
  #1  
Newbie
Thread Starter
 
CLK320 BC's Avatar
 
Join Date: Feb 2022
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
CLK320
Shift Lever Assembly for CLK 320

My shift lever got stuck. Mechanic says I need the part # 2022670824
I tried to find it online, but it says it's been discontinued I really like my CLK so I'm trying to figure out how to get it fixed

Thanks,
Old 02-24-2022, 09:40 AM
  #2  
Senior Member
 
convicted's Avatar
 
Join Date: Feb 2020
Posts: 331
Received 39 Likes on 38 Posts
1998 CLK 320
Try LKQ or somewhere similar.
Old 02-28-2022, 03:50 AM
  #3  
Junior Member
 
LateLife Crisis's Avatar
 
Join Date: Nov 2020
Location: Airlie Beach, Queensland, AUS
Posts: 40
Received 5 Likes on 3 Posts
2001 CLK 430
Is it stuck in park? , you need to check the interlock cable running from ignition to the shifter by removing black trim then wooden surround trim (disconnect wiring to switches on one side). Then remove 2 x cross head screws to remove ash tray. The cable runs to the front right of shifter module and is located in a molded s groove under where the ash tray was. Chech it hasn't become dislodged. There is also a small flip away access hole that if you put something like a pen or screwdriver in and push firmly down to enable shifter movement for towing.
Old 02-28-2022, 03:51 AM
  #4  
Junior Member
 
LateLife Crisis's Avatar
 
Join Date: Nov 2020
Location: Airlie Beach, Queensland, AUS
Posts: 40
Received 5 Likes on 3 Posts
2001 CLK 430
Is it stuck in park? , you need to check the interlock cable running from ignition to the shifter by removing black trim then wooden surround trim (disconnect wiring to switches on one side). Then remove 2 x cross head screws to remove ash tray. The cable runs to the front right of shifter module and is located in a molded s groove under where the ash tray was. Chech it hasn't become dislodged. There is also a small flip away access hole that if you put something like a pen or screwdriver in and push firmly down to enable shifter movement for towing.

Last edited by LateLife Crisis; 02-28-2022 at 03:54 AM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Shift Lever Assembly for CLK 320



All times are GMT -4. The time now is 03:22 AM.