diy fog lights
06-30-2005, 07:33 PM
#2
Senior Member
Join Date: Mar 2005
Location: By the City by the Bay, CA
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
2001 E320 (210.065), Brilliant Silver; 2002 Ducati ST-2, Arrest-me Red
Are you talking about replacing the foglights with an aftermarket, replacing the lens, bulbs, or???
I think the CLK is the same design on this as the 210 (E class) which is most of my experience.
To change the fog light bulb there's an access panel under the front end near the light.
To change the foglight itself, raise the front end and then drop the whole plastic pan, there's 6 or 8 bolts that hold it on, wear eye protection because a lot of junk accumulates. Once the pan is out of the way you can access the light fixtures.
If you need stock parts www.autohausaz.com and www.autopartswarehouse.com have lots of OEM lights and lenses.
Enjoy the ride,
Greg
I think the CLK is the same design on this as the 210 (E class) which is most of my experience.
To change the fog light bulb there's an access panel under the front end near the light.
To change the foglight itself, raise the front end and then drop the whole plastic pan, there's 6 or 8 bolts that hold it on, wear eye protection because a lot of junk accumulates. Once the pan is out of the way you can access the light fixtures.
If you need stock parts www.autohausaz.com and www.autopartswarehouse.com have lots of OEM lights and lenses.
Enjoy the ride,
Greg
06-30-2005, 07:46 PM
#3
Member
Thread Starter
Join Date: Mar 2004
Location: Long Island
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
2005 Clk 500 Coupe
fogs
i was changing out the bulb itself..not the enclosure.. i thought it was gonna be hard but it seems pretty easy i havent really taken a look at it yet...thanks
