This is so hard...
Thread Starter
MBWorld Fanatic!
Joined: Mar 2008
Posts: 1,753
Likes: 2
From: New York City
Yo Momma
This is so hard...
How do i change the license plate bulbs? I took out the inner carpet cover as well but cant take out the bulbs...i searched, i searched and i searched again. Found nothing. Can someone help? 
Member
Joined: May 2007
Posts: 223
Likes: 3
From: Orlando, Florida, USA
09CLK550Cab 61k miles
That's right, from the outside.
Get a flash light and get down on your knees and look up at the clear white plastic lenses - needs a screwdriver.
Be careful when putting back the covers, since they are direction and have a gasket to keep out water.
Also, replace both at once. Once of mine burned out, and the other was silvered on the inside, so it was also nearly burned out.
Get a flash light and get down on your knees and look up at the clear white plastic lenses - needs a screwdriver.
Be careful when putting back the covers, since they are direction and have a gasket to keep out water.
Also, replace both at once. Once of mine burned out, and the other was silvered on the inside, so it was also nearly burned out.
Thread Starter
MBWorld Fanatic!
Joined: Mar 2008
Posts: 1,753
Likes: 2
From: New York City
Yo Momma
i knew it was from outside but when i took out the screws from outside the lens didnt wanna come out so i thought it was like the w208 from inside...Do i put in a screw driver and pull the lens or what? thanks a lot guys....
