MBWorld Fanatic!
Kevwood
MBWorld Fanatic!
close
- Join DateJul 2010
- LocationA Canadian in Dubai, United Arab Emirates
- Posts:4,748
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive'05 C200K SS, '05 Kleemann CLK500K, '08 Hummer H3 & '92 Z34 5sp (track car in Canada)
-
Likes:0
-
Liked:0 Times in 0 Posts
Quote:
Thats a big chunk of power to the rear wheels for the 500. You had Kleemann headers installed for that run right?Originally Posted by buffyclk500
Dyno with old intake and cat back was 271rwhp and 300 tq...
MBWorld Fanatic!
Quote:
Sounds great, will they fit the W209?Originally Posted by dynomite05
They look the same. The one including front and rear is a great deal!
Will I have to do anything to make them fit?
Or are they a straight swap?
Thanks!
MBWorld Fanatic!
there is a diy made by a member. although i forgot his name, he has this whole site listed with diy for the CLK 320 including a big brake install. .
however, i dont think the w211 brakes fit the w209.... could be wrong tho. i remember reading it somewhere.
if you find brakes that fit the w209. its essentially straight swap. new rotors, and you might want new lines.
however, i dont think the w211 brakes fit the w209.... could be wrong tho. i remember reading it somewhere.
if you find brakes that fit the w209. its essentially straight swap. new rotors, and you might want new lines.
Out Of Control!!
Quote:
Will I have to do anything to make them fit?
Or are they a straight swap?
Thanks!
I'm not 100% sure on the fitment.Originally Posted by mikata
Sounds great, will they fit the W209?Will I have to do anything to make them fit?
Or are they a straight swap?
Thanks!
Quote:
however, i dont think the w211 brakes fit the w209.... could be wrong tho. i remember reading it somewhere.
if you find brakes that fit the w209. its essentially straight swap. new rotors, and you might want new lines.
Originally Posted by bheng
there is a diy made by a member. although i forgot his name, he has this whole site listed with diy for the CLK 320 including a big brake install. .however, i dont think the w211 brakes fit the w209.... could be wrong tho. i remember reading it somewhere.
if you find brakes that fit the w209. its essentially straight swap. new rotors, and you might want new lines.
Here is the link to that site.
http://www.mwstewart.co.uk/articles/w209sportbrakes/
MBWorld Fanatic!
Quote:
Originally Posted by Kevwood
Thats a big chunk of power to the rear wheels for the 500. You had Kleemann headers installed for that run right?
Headers help alot but that dyno was not with headers just old v1 intake and a catback set up
MBWorld Fanatic!
Quote:
Here is the link to that site.
http://www.mwstewart.co.uk/articles/w209sportbrakes/
Your's look alot like the amg calipers in size. Are they 6 piston in front and 4 in the rear?Originally Posted by dynomite05
I'm not 100% sure on the fitment.Here is the link to that site.
http://www.mwstewart.co.uk/articles/w209sportbrakes/
Out Of Control!!
The size is almost the same. My fronts are Brembo 14" 355mm 4 piston, and my rears are AMG 330mm 4 piston off the Black Series/63.
MBWorld Fanatic!
Quote:
Ok, so question is, if the 6 piston front caliper will fitOriginally Posted by dynomite05
The size is almost the same. My fronts are Brembo 14" 355mm 4 piston, and my rears are AMG 330mm 4 piston off the Black Series/63.

I will talk to the dealship tomorrow and see if it's possible.
Really want this mod

Thanks for the help!
MB World Stories
The Best of Mercedes & AMG
ExploreOut Of Control!!
Yes, 6 piston caliper will fit. Lowpost did the 6/4 upgrade.
MBWorld Fanatic!
Quote:
GreatOriginally Posted by dynomite05
Yes, 6 piston caliper will fit. Lowpost did the 6/4 upgrade.

Thanks!