DIY: CLK500 with Tan Interior Wrapped w Black Carbon fiber Vynil
03-20-2011, 12:58 AM
#42
MBWorld Fanatic!
Thread Starter
This thread is the instruction lol. What part that u dont understand ? Follow my pics you should be able to take those wood trims out . Keyless go will be the same as a non one except you will see two little pins on the top of ur knob ..
Last edited by M-bENZ; 03-20-2011 at 01:09 AM.
03-20-2011, 05:40 PM
#46
Out Of Control!!
Join Date: Apr 2008
Location: Jerzy
Posts: 10,275
Likes: 0
Received 9 Likes
on
9 Posts
04 CLK 320 > CLK32K
03-20-2011, 05:46 PM
#47
MBWorld Fanatic!
Join Date: Feb 2004
Location: Milton, MA USA
Posts: 2,956
Received 175 Likes
on
145 Posts
me: 2015 SL400 & 2015 ML400; wife: 2022 GLC Coupe kid: 2017 GLC SUV
You don't even have to remove the knob; the wood piece will fit right over it once you detach the leather boot. Me, I'm eager to learn how to get the door pieces off!
03-20-2011, 07:46 PM
#49
MBWorld Fanatic!
Thread Starter
Update:
Got my door trims wrapped today ( not yet on the window switch, something came up i gotta go thats Y ). Anyway, i got my glovebox handle covered too. I didnt have to take off the door panel but put the vynil on the trim then i used one these tool below (see pics) or you can use the razor blade ( becareful when you do this/ if your not handy enough sorry you will have to take off the panel lol) to cut along the line ( i used my finger nail to make a line following the trim curl before i cut it).
Here are the pics,
Got my door trims wrapped today ( not yet on the window switch, something came up i gotta go thats Y ). Anyway, i got my glovebox handle covered too. I didnt have to take off the door panel but put the vynil on the trim then i used one these tool below (see pics) or you can use the razor blade ( becareful when you do this/ if your not handy enough sorry you will have to take off the panel lol) to cut along the line ( i used my finger nail to make a line following the trim curl before i cut it).
Here are the pics,
Last edited by M-bENZ; 03-20-2011 at 08:14 PM.
