Need help with lighting (Low beam)
11-26-2011, 09:02 PM
#1
Member
Thread Starter
Join Date: Oct 2008
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
CLK
Need help with lighting (Low beam)
Hey guys,
I was replacing my low beam bulb today and the metal clip that sits on the socket (round ring) fell off and i cannot find it any where
Now the low beam light does not clip into place properly. I'm wondering if there is a replacement i can buy somewhere since i cant seem to find the part number.
This picture shows the metal clip being on still (not lost) its the one that sits below the bulb and has two pedals sticking out.
Also another question was about my service light (i guess you can call it) underneath the high beam bulb. At times it seems to work, others it does not. I took a look and the socket seems to be burned, what can be done about this?
I was replacing my low beam bulb today and the metal clip that sits on the socket (round ring) fell off and i cannot find it any where
Now the low beam light does not clip into place properly. I'm wondering if there is a replacement i can buy somewhere since i cant seem to find the part number.This picture shows the metal clip being on still (not lost) its the one that sits below the bulb and has two pedals sticking out.
Also another question was about my service light (i guess you can call it) underneath the high beam bulb. At times it seems to work, others it does not. I took a look and the socket seems to be burned, what can be done about this?
11-27-2011, 07:19 PM
#3
MBworld Guru
Sorry, I don't believe the parts for the headlight assembly are available individually. Your best bet would be to buy a used headlight (maybe a broken one) to use as a donor for parts.
