taoclk

Need some help here if anyone is familiar with 3 piece wheels. Specifically 19".

So I bought some Asanti wheels and the offset is totally wrong, but I good a good deal so I bought it anyways. Actually the offset is not even shown on the wheels at all. It came with 7.5" inner barrels in the front/2" lip, and 8" inner barrels in the back with 2.5" lip. The backs will fit with 20mm spacers (I tried it actually) but I don't really wanna run spacers, I'd rather have a bigger front lip.

I also have extra pieces front and backs that i bought elsewhere.
So here's what I'm thinking:
I run 7" inner barrels with 3.5" lips on backs and run 6.5" inner barrels with 2.5" lips on fronts. that'll make it 19x10 in back and 19x8.5 in front. I have most parts to make this happen except a 3.5" lip (I can order). I think this should work but would love to have any inputs from you guys around here.

Here's all the parts I have to make this happen (not all in pairs though)
Inner barrels:
two 19x8
two 19x7.5
two 19x7
two 19x6.5

Lips:
two 19x2 (one has a bend, hence I don't want to run 2" lips in front because I have to repair)
four 19x2.5 (one set polish, one set chrome)
one 19x3.5 (can get another one)
one 19x4 (can get another one)

I have a 05 clk 320, what's the max inner barrel/lip combo can I run on fronts/backs?
Can I run a 4" lip on back with the 7" inner barrel?

any input will be greatly appreciated. TIA!!!

taoclk

Any help??

taoclk

228 views and no response huh? lol
ok, how bought an easier question, (does not have to be 3 piece wheels) Does anyone have 3.5" or 4" lip on their back wheels?
does anyone have a 2.5" lip in the front wheels?

EuroTra$H

2 inch front X 3.5 inch rear here.