245/35/19 for W209

Reply Subscribe

Thread Tools

Search this Thread

Rate Thread

Aug 13, 2003 | 06:45 AM

xquisit

Thread Starter

Almost a Member!

Joined: Jul 2003

Posts: 59

Likes: 0

From: Michigan

CLK500

245/35/19 for W209

Hi luke
can W209 front fender accept 245/35/19 without any rubbing problem?

P.S. I also planned to lower the car

Thanks

'04 CLK 500

Aug 13, 2003 | 11:11 AM

rgiorgio

Member

Joined: Jul 2002

Posts: 187

Likes: 6

From: Florida Keys

CLK, ML, GL

Everybody you talk to says 235/35/19 in front & 265/30/19 in rear, otherwise you will have problems. I will be putting these on Kleemann wheels next week.

Aug 13, 2003 | 03:03 PM

Harris

MBWorld Fanatic!

Joined: Jan 2002

Posts: 4,439

Likes: 1

Re: 245/35/19 for W209

Quote:

Originally posted by xquisit
Hi luke
can W209 front fender accept 245/35/19 without any rubbing problem?

P.S. I also planned to lower the car

Thanks

'04 CLK 500

I think it will be very very tight. Nobody has tried it. My prediction is it will rub. But then again, depends on what tire you are using and how much you're lowering. On the safe side, better keep it 235/265 (or 275).

Aug 13, 2003 | 04:09 PM

Lucas

Super Member

Joined: Feb 2002

Posts: 529

Likes: 0

We at KLEEMANN would use a 275/30 rear on the W 209, no rubbing with a 9,5 x 19 ET 35.

A 245 front will 99,9 % sure create a problem, but what ET will you use ????

Aug 14, 2003 | 04:08 AM

xquisit

Thread Starter

Almost a Member!

Joined: Jul 2003

Posts: 59

Likes: 0

From: Michigan

CLK500

well actually I just asked whether 245/35/19 fit without any problem because I was thinking abt getting 19 inch wheels with All season tires. Does any of you recommend having 19 inch with all season tires or I better get all season tire for the 17 inch?

By the way, lucas I want to ask you abt the kleemans muffler. If I want to change my stock muffler to the round rectangle kleemans one, would I need to modify my bumper to fit it right?

Thanks for the reply

P.S. what is an ET?

'04 CLK 500 K3, K4 Black/Charcoal

Aug 17, 2003 | 11:07 AM

Lucas

Super Member

Joined: Feb 2002

Posts: 529

Likes: 0

The ET is the ofset of the wheel.

The KLEEMANN rear muffler will only fit with the KLEEMANN rear
skirt, it will stick too far out with out the skirt.

Reply Subscribe