radio wire diagram 2004 clk 320
Thread Starter
Newbie
Joined: Feb 2013
Posts: 2
Likes: 0
radio wire diagram 2004 clk 320
i have the wire harness .it snaps into the factory wires but they dont line up and i cant seem to figure out how to pull out and switch locations so they line up...if i have to cut into the factory wires i need to know what color wire does what as far as power/constant/ground , and any other wire i might need to know what it is ? thanks in advance
wire color i see
brown
red/blue
green/red
black/yellow
blue/white
wire color i see
brown
red/blue
green/red
black/yellow
blue/white
Last edited by 9time; Feb 18, 2013 at 09:33 PM.
MBworld Guru
Joined: Dec 2009
Posts: 10,782
Likes: 1,011
NO LONGER ACTIVE
This may help:
http://benzbits.com/w203/Audio10PinOuts.pdf
Note that you will not find pins for switch +12v or illumination - those are supplied by CAN bus signals, so for an aftermarket setup, your best bet is to get those from the cigarette lighter socket and it's light there in the center console.
http://benzbits.com/w203/Audio10PinOuts.pdf
Note that you will not find pins for switch +12v or illumination - those are supplied by CAN bus signals, so for an aftermarket setup, your best bet is to get those from the cigarette lighter socket and it's light there in the center console.
