DIY VIDEO: Installing L.E.D Fog light bulbs
Thread Starter
Newbie
Joined: Sep 2013
Posts: 8
Likes: 0
clk350 w209
DIY VIDEO: Installing L.E.D Fog light bulbs
Just wiped up a video this weekend when I installed my fog lights. This video gift comes with a question.
As you will see at the end of the video the fog lights would blink because the dash read a fog light error. The low led wattage causes the car to shut the power off to the lights, I know there is a decoder to by pass when installing aftermarket HID's, but is there anything I can do to get the LED fog lights to work?
Thanks
As you will see at the end of the video the fog lights would blink because the dash read a fog light error. The low led wattage causes the car to shut the power off to the lights, I know there is a decoder to by pass when installing aftermarket HID's, but is there anything I can do to get the LED fog lights to work?
Thanks
MBworld Guru
Joined: Dec 2009
Posts: 10,782
Likes: 1,011
NO LONGER ACTIVE
I answered this over on Benzworld, too, but yes, the same 55w "cancellers" for headlights are supposed to work for this, but I had problems with these cheap Chinese parts melting. I ended up using my OEM bulbs, wired in parallel, hidden in the bumper.
MBWorld Fanatic!
Joined: Oct 2012
Posts: 1,401
Likes: 312
CLK55 W209, CL63 W216
I used this with my HID fog conversion. Works like a charm.
http://www.theretrofitsource.com/pro...roducts_id=238
http://www.theretrofitsource.com/pro...roducts_id=238
