top will not go down
I have been reading the forum but can't find the answer. The top started to open (don't know if she let the switch go too soon or what) then it just would not finish going up and would not close. I pushed down on the bottom of the window to get it to latch back (hope that didn't screw it up) and it did latch. The windows go up and down as they should and the roll bars will go up and down with the button. When you hold up the open button it flashes slow. Malfunction ( I know that!!!). What can or should I do now???
|
It's probably a bad microswitch that cause the top to stop operating. Forcing it could have broken something, but it's hard to know without looking at the system. I think the first step would be to pull the error codes from the soft top control unit. This might require a visit to the dealer, or at least a good indy with the proper diagnostic equipment.
|
Probably won't help
This probably won't help but when I had the wiring at the interior overhead light unplugged ( I had the whole assembly out) the top would not work. I don't know if the control module lives up there.
|
I don't so, but I think there are microswitches in the windshield heard that may be wired into the OCP. Does it work with the OCP reinstalled?
|
Originally Posted by Rudeney
(Post 5988321)
I don't so, but I think there are microswitches in the windshield heard that may be wired into the OCP. Does it work with the OCP reinstalled?
|
All times are GMT -4. The time now is 11:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands