Connecting MOST decoder
Thread Starter
Junior Member
Joined: Apr 2020
Posts: 28
Likes: 0
CLK500
Connecting MOST decoder
Hello! Recently I've purchased an android headunit and MOST decoder since I have Harman/Kardon. However, the decoder is a chinese unit and has only 4 wires in total. 2 RCA inputs and 2 regular yellow and black. I've connected everything up though still no sound. I've seen people with CLKs use decoders with 3 wires (yellow, red and black) could this be the issue? Wrong decoder? Are the ones with 3 wires are compatbile (says compatible with ML GL R classes).
Also, does the CLK need the CAN bus wires like some w211 do? And does the BLACK/BLUE wire need to be connected to ACC (since it should be amp wake-up)?
Any advice is much appreciated.
Also, does the CLK need the CAN bus wires like some w211 do? And does the BLACK/BLUE wire need to be connected to ACC (since it should be amp wake-up)?
Any advice is much appreciated.
Last edited by RiMiX; May 24, 2021 at 09:50 AM.
