W209 R&I Control Arms from WIS
05-09-2024, 11:47 AM
#1
Member
Thread Starter
W209 R&I Control Arms from WIS
After searching this forum's threads, and also looking in Group 32 and 33 of WIS, I am still in need of the WIS document or the document numbers so I can replace these parts.
(I also looked in Group 33 based on the part numbers.) Tried searching in WIS for Torsion Strut, Torsion Bar as well as Control Arm.
Anyone have either of those?
Advice Question: This CLK has only 72000 miles, but I suspect the control arms because of 'clunk' when going over pavement transitions and similar road surfaces. As well, the ride is very rough for the first several miles. Tracking while on curves is stable.
Are both the upper and lower generally ready to be replaced together, or does one of those take the most of the wear?
(I also looked in Group 33 based on the part numbers.) Tried searching in WIS for Torsion Strut, Torsion Bar as well as Control Arm.
Anyone have either of those?
Advice Question: This CLK has only 72000 miles, but I suspect the control arms because of 'clunk' when going over pavement transitions and similar road surfaces. As well, the ride is very rough for the first several miles. Tracking while on curves is stable.
Are both the upper and lower generally ready to be replaced together, or does one of those take the most of the wear?
Last edited by Jerry Easley; 05-09-2024 at 12:04 PM. Reason: clarification
