Supersprint Muffler for W208 '55
#1
MBWorld Fanatic!
Thread Starter
Supersprint Muffler for W208 '55
What do you guys think?
http://www.supersprintna.com/product...arch_model/211
It seems decent? It's all Stainless too...
Has anyone installed this on a 208 55 or even a 209 55?
I honestly find the Eisenmann Race to be a bit too rumbly/loud for the 55. I'd like to sound more like a '63 (raspier?)
Thanks for any suggestions!
Rgds,
http://www.supersprintna.com/product...arch_model/211
It seems decent? It's all Stainless too...
Has anyone installed this on a 208 55 or even a 209 55?
I honestly find the Eisenmann Race to be a bit too rumbly/loud for the 55. I'd like to sound more like a '63 (raspier?)
Thanks for any suggestions!
Rgds,
#2
MBWorld Fanatic!
Go with the Supersprint if you want that more metallic type sound. I got my sound mostly from the cat delete. I was low and rumbly before that. Not to mention the headers just amplified it that much more!!
#3
Super Member
Join Date: Jun 2007
Location: Sparks, NV
Posts: 613
Likes: 0
Received 1 Like
on
1 Post
03 CLK 55 AMG, IMCO muffler/Magnaflow tips, KW V1 coilovers, 19" Petrol Metrix Wheels
if i were you i would just have a nice magnaflow muffler and some stainless or chroms tips installed. the amg exhaust is a 3" inch mandrel bent exhaust from the factory. you are not going to get much better than that. if you have a good exhaust shop close they will weld on the muffler and tips in four to five hours. cost me about $800 here in northern NV. Magnaflow will give you the euro sound you are looking for.
#4
Out Of Control!!
Join Date: Nov 2002
Location: around the world
Posts: 12,470
Likes: 0
Received 0 Likes
on
0 Posts
monowiper
i'd rather have something low rumble, smooth, not raspy at all
i heard good things about Magnaflow 44 muffler on euro v8's, heard a lot of Supersprints but didn't really like their sound, they sound good in high reving engines though, formula one type sound.
#5
Member
Join Date: May 2005
Location: norcal/socal
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
C32/ A4 3.0/ E320 W211
if i were you i would just have a nice magnaflow muffler and some stainless or chroms tips installed. the amg exhaust is a 3" inch mandrel bent exhaust from the factory. you are not going to get much better than that. if you have a good exhaust shop close they will weld on the muffler and tips in four to five hours. cost me about $800 here in northern NV. Magnaflow will give you the euro sound you are looking for.