55k airbox on w208 clk55 help
#1
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Oakland, CA
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
2011 C63
55k airbox on w208 clk55 help
thinking about doing the 55k y splitter to two airbox and kevlar air tubing...after some research...
for the y splitter
1. it has to be reversed and use electric tape on both side to snug it up to the maf? what do people use to plug the s/c hole?
airboxs
1. they should just bolt onto existing post correct?
kevlar air tubes
1. will it reach to the front of the w208 grill? if so how does one modify it to fit the rectangular shape vs the w211 funnel shape?
engine cover
1. which engine cover will fit without too much modifications? 55k engine cover, c63 engine cover, or suggestions?
from searching, i've gathered all the part numbers just wanted to make sure it's worth it and i'm tired of looking at that huge heat soaking air box on top
for the y splitter
1. it has to be reversed and use electric tape on both side to snug it up to the maf? what do people use to plug the s/c hole?
airboxs
1. they should just bolt onto existing post correct?
kevlar air tubes
1. will it reach to the front of the w208 grill? if so how does one modify it to fit the rectangular shape vs the w211 funnel shape?
engine cover
1. which engine cover will fit without too much modifications? 55k engine cover, c63 engine cover, or suggestions?
from searching, i've gathered all the part numbers just wanted to make sure it's worth it and i'm tired of looking at that huge heat soaking air box on top
Last edited by slowsky; 07-08-2010 at 03:07 PM.