Any issue with running 10mm spacer in front ?
MBWorld Fanatic!
Joined: Sep 2008
Posts: 1,700
Likes: 0
From: Bergen Co,NJ
14' CLS550
Im using H&R 10mm spacers in the front. sorry I don't have the product #.. make sure you get hub centric spacers and you will now need longer bolts in the front.. As long as you have fender clearance you will have no issues.
MBWorld Fanatic!
Joined: Jul 2009
Posts: 3,530
Likes: 387
Only MBs - the best or nothing
Correct H&R 10mm front spacers part number is 20556659. To avoid confusion H&R rear 10mm spacers part number is 2055665. All H&R spacers are hubcentric and when used with appropriate longer bolts (and wheels' bolts torqued as per specs) cause no vibration at all. I use them on all vehicles.
MBWorld Fanatic!
Joined: Jul 2009
Posts: 3,530
Likes: 387
Only MBs - the best or nothing
1. If you can install wheel, but not the center cap - cut/break center caps' tabs and secure with tape on the inside
or
2. If you can not install wheel at all, then there're only two choices - A. you can not use spaces larger than 5mm with those specific wheels upfront, or B. you can not use these wheels if you want to use front spacers larger than 5mm (I would go with A.).
