location of canbus connector in 2012 CLS
#1
Newbie
Thread Starter
location of canbus connector in 2012 CLS
All,
I am trying to finish the installation of my automatic car starter and the final step is to plug in the system to the can bus so my keyless go will work, however I cannot find it. I did some searches and the only thing I found is that in the 2015 models and up are under the passenger seat but its not there for the 2012 so any help will be most appreciated.
I am trying to finish the installation of my automatic car starter and the final step is to plug in the system to the can bus so my keyless go will work, however I cannot find it. I did some searches and the only thing I found is that in the 2015 models and up are under the passenger seat but its not there for the 2012 so any help will be most appreciated.
#2
Newbie
Thread Starter
Kinda sucks no one responded but for anyone looking for where the Can B connection is on their CLS it is on the passenger side of the car. you have to lift up the floor all the way down and on the side there is a bunch or wires running down the connector next to the door hinges. it took me a while to find it.
The following users liked this post:
gNasty (08-10-2022)
#4
PREMIUM SPONSOR
We offer a solution to this vehicle. Perhaps its ours that you're using?
Might be a little late to this post but this is the product for your vehicle and the other link is to the installation instructions.
Product: https://www.midcityengineering.com/p...er-sksng204d3/
Installation instructions HERE.
Might be a little late to this post but this is the product for your vehicle and the other link is to the installation instructions.
Product: https://www.midcityengineering.com/p...er-sksng204d3/
Installation instructions HERE.