Coding from Japan to Europe spec
Thread Starter
Newbie
Joined: Jul 2018
Posts: 5
Likes: 0
W126 280SE
Coding from Japan to Europe spec
Dear members,
Note: I have tried searching various forums and videos for weeks but unfortunately couldn't find a specific answer to it.
Problem: I have imported a 2011 CLS 350 from Japan which I now need to get registered in Europe. Europe has a different Radio frequency and the Light beam pattern is also different.
Questions:
I will appreciate any helpful answer, thank you.
Note: I have tried searching various forums and videos for weeks but unfortunately couldn't find a specific answer to it.
Problem: I have imported a 2011 CLS 350 from Japan which I now need to get registered in Europe. Europe has a different Radio frequency and the Light beam pattern is also different.
Questions:
- Can the coding of radio (NTG 4.0) be done via any tool that can be easily used and purchased by me? (Of course can not source Xentry). From Japan to ECE spec.
- Any members who have done this before with any tool
- Acting Tourist mode only is not sufficient
- This car has Xenon lights, which means the projector needs to be replaced physically.
- In the case of Multi-Beam LED headlights. Could they be converted from LHD to RHD traffic beam pattern by any Autel system (Asking for the facelift, or W213, W222)?
I will appreciate any helpful answer, thank you.
Last edited by redfaction95; Aug 9, 2024 at 12:10 PM.
