Official C219 CLS Picture Thread
#277
Hey Guys,
Been a while since I been here trying to get my car to keep up with all these other ones you got going on here. I have only a few mods but I will be doing a new photoshoot this week or next with the new wheels.
OEM
Exterior: Black
Interior: Burgundy
AMG Package
Mods
CF Lip
CF Trunk Spoiler
HID Top & Bottom
Black One Fin Grille
Programa Lowering Module
20" Velos Solo X Wheels (New)
20" Giovanni Wheels in the Pics (Sold)
I have some Mods coming up next that I want to do.
Programa Lowering Module Installed
CF Lip Installed
Next Photoshoot will be with my Velos Solo X Wheels & some interior shots. hope you all enjoy!
Been a while since I been here trying to get my car to keep up with all these other ones you got going on here. I have only a few mods but I will be doing a new photoshoot this week or next with the new wheels.
OEM
Exterior: Black
Interior: Burgundy
AMG Package
Mods
CF Lip
CF Trunk Spoiler
HID Top & Bottom
Black One Fin Grille
Programa Lowering Module
20" Velos Solo X Wheels (New)
20" Giovanni Wheels in the Pics (Sold)
I have some Mods coming up next that I want to do.
Programa Lowering Module Installed
CF Lip Installed
Next Photoshoot will be with my Velos Solo X Wheels & some interior shots. hope you all enjoy!
The following 2 users liked this post by Murdercls:
a100steaksauce (11-16-2016),
Dokuji (02-07-2023)
#279
we have allready talk at stanceworks when we was driving W203's, well, now you have this CLS and i'm trying to buy one too
Congrats for this perfect looking car...it's perfect. Did you fit 10" all round? Can you tell me what ET are you using and tyre size?
Thanks in advance, congrats one more time!
Congrats for this perfect looking car...it's perfect. Did you fit 10" all round? Can you tell me what ET are you using and tyre size?
Thanks in advance, congrats one more time!
#280
Member
Join Date: Jan 2006
Location: Belgium, East-Flanders
Posts: 215
Likes: 0
Received 2 Likes
on
2 Posts
CLS320cdi, GL350BT, ML270cdi
thanks ! great you are looking to buy a CLS, they are great cars !
I have 10" al round. ET 20 front an ET30 in the rear (although I would recommend ET25 in the rear , or a wider wheel ) I'm going to ad a spacer
tires in front are 245/30R20 and 255/30R20 in the rear, Hankook Ventus.
good luck in your search, post it up here when u have found one.
Ps: your w203 was awesome, I preferred the alphards and futura's the most ...
I have 10" al round. ET 20 front an ET30 in the rear (although I would recommend ET25 in the rear , or a wider wheel ) I'm going to ad a spacer
tires in front are 245/30R20 and 255/30R20 in the rear, Hankook Ventus.
good luck in your search, post it up here when u have found one.
Ps: your w203 was awesome, I preferred the alphards and futura's the most ...
The following 2 users liked this post by Murdercls:
a100steaksauce (11-16-2016),
Dokuji (02-07-2023)
#284
Member
Join Date: Jan 2006
Location: Belgium, East-Flanders
Posts: 215
Likes: 0
Received 2 Likes
on
2 Posts
CLS320cdi, GL350BT, ML270cdi
car looks great ! first time I see that color, looks nice.
what brand of rotors do you have mounted ?
As I expected, great start ! love the carbon interior too.
keep us updated
grtz
what brand of rotors do you have mounted ?
keep us updated
grtz
#285
MBWorld Fanatic!
#286
Senior Member
My CLS. I ordered a single bar grille, clear side markers, and lowering links. Looking at wheel options, Vossen CV3 in anthracite probably
Last edited by foreyes; 05-01-2016 at 09:27 AM.
#292
Greetings from New Zealand
Here's my CLS550 AMG.....
2006 CLS550 AMG
20x9 & 20x10.5 Niche Verona Alloys
245/35R20 & 275/30R20 Achilles ATR Sport 2 Tyres
Lowering Links
20% Tinted Windows
Roof & Boot Spoiler
K&N Filters
Secondary Cat/Resonator Delete, Cross Pipe & After Market Mufflers
ECU Tune to Approx 430HP & 575nm Torque
2006 CLS550 AMG
20x9 & 20x10.5 Niche Verona Alloys
245/35R20 & 275/30R20 Achilles ATR Sport 2 Tyres
Lowering Links
20% Tinted Windows
Roof & Boot Spoiler
K&N Filters
Secondary Cat/Resonator Delete, Cross Pipe & After Market Mufflers
ECU Tune to Approx 430HP & 575nm Torque
The following users liked this post:
dan928 (06-01-2018)
#295
#296
thank you!
well, front wheels need new barrels, so I can go to wider tyres. I'm trying to find 6.5" barrels at good price at this moment.
At this moment they are:
8.25" in front, with 215 35 19
10" at rear, with 255 30 19.
the final setup I want is:
9.5 in front with 235 35;
10 at rear with 265 30
well, front wheels need new barrels, so I can go to wider tyres. I'm trying to find 6.5" barrels at good price at this moment.
At this moment they are:
8.25" in front, with 215 35 19
10" at rear, with 255 30 19.
the final setup I want is:
9.5 in front with 235 35;
10 at rear with 265 30
#297
thank you!
well, front wheels need new barrels, so I can go to wider tyres. I'm trying to find 6.5" barrels at good price at this moment.
At this moment they are:
8.25" in front, with 215 35 19
10" at rear, with 255 30 19.
the final setup I want is:
9.5 in front with 235 35;
10 at rear with 265 30
well, front wheels need new barrels, so I can go to wider tyres. I'm trying to find 6.5" barrels at good price at this moment.
At this moment they are:
8.25" in front, with 215 35 19
10" at rear, with 255 30 19.
the final setup I want is:
9.5 in front with 235 35;
10 at rear with 265 30
the barrel width n lips width??
Are you using spacer or just plug-in??
regards From Jakarta Indonesia
#298
#299
Work done on my w219, allmost finished, just need a better steering wheel.
Before:
subirimagenes
After:
Before:
subirimagenes
After:
#300
Hey guys!
Decided it was time to join your awesome forum.
We do alot of car signage and wraps where i work.
And we just had to try making a custom printed rust / wrap.
The whole car is covered in custom printed clear vinyl with a matte laminate.
Lowering and new wheels are on there way, but its winter right now in Norway.
I understand this might get alot of hate, currently bracing myself!
The sketch and the finished wrap:
Decided it was time to join your awesome forum.
We do alot of car signage and wraps where i work.
And we just had to try making a custom printed rust / wrap.
The whole car is covered in custom printed clear vinyl with a matte laminate.
Lowering and new wheels are on there way, but its winter right now in Norway.
I understand this might get alot of hate, currently bracing myself!
The sketch and the finished wrap:
Last edited by Ungenugatti; 01-02-2017 at 08:10 AM.