cls 500 - change tips to quad tip exhaust
Thread Starter
Newbie
Joined: Jun 2010
Posts: 5
Likes: 0
Cls z500
cls 500 - change tips to quad tip exhaust
Greetings,
Can some one please lead me towards the right direction here. I am trying to add the cls500 AMG look to my existing cls 500. I love the look of it and not really trying to do it for performance. Where can I buy those quad tips from? Any advice?
Thanks!
Can some one please lead me towards the right direction here. I am trying to add the cls500 AMG look to my existing cls 500. I love the look of it and not really trying to do it for performance. Where can I buy those quad tips from? Any advice?
Thanks!
MBWorld Fanatic!
Joined: Aug 2004
Posts: 3,764
Likes: 9
From: Blasting off!
CLS63 Designo Edition, Hyundai Genesis 3.8 , Veloster Turbo, CLS500(Sold), E320 (SMOKED) R500 (Sold)
LOL...this is so funny. I am doing the same mod this week.
1. Get the CLS55 mufflers and tips. Check Ebay, and if you cannot get it there go to: http://www.getmercedesparts.com/part...layCatalogid=0 Expensive though....
Note: My muffler guy says around $90 to cut old ones and put new ones in. The CLS500 pipes are 2.5 in, and the CLS55 are 3 in, but no problem for a good muffler shop to do.
2. Get a body shop to cut the bumper.
Note: I am taking the old diffuser off, and I have a CF diffuser for the CLS55 that I am putting on. So, this makes is very easy for the body shop to use that pattern for the cut.
3. Get mufflers in.
That should be it.
1. Get the CLS55 mufflers and tips. Check Ebay, and if you cannot get it there go to: http://www.getmercedesparts.com/part...layCatalogid=0 Expensive though....
Note: My muffler guy says around $90 to cut old ones and put new ones in. The CLS500 pipes are 2.5 in, and the CLS55 are 3 in, but no problem for a good muffler shop to do.
2. Get a body shop to cut the bumper.
Note: I am taking the old diffuser off, and I have a CF diffuser for the CLS55 that I am putting on. So, this makes is very easy for the body shop to use that pattern for the cut.
3. Get mufflers in.
That should be it.
Last edited by bigben320e; Sep 28, 2010 at 03:20 PM.
