Violent jolt on kickdown when cold
01-26-2011, 02:38 PM
#1
Newbie
Thread Starter
Join Date: Jan 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Cls320cdi
Violent jolt on kickdown when cold
Hi
I have a Cls 320 cdi 55. I've recently noticed that when the car is cold the car jolts from 2nd to 1st, and when I kick down to accelerate there is a violent jolt until the car warms up, then all is ok. Has anyone had this problem and if so is there a cure?
I have a Cls 320 cdi 55. I've recently noticed that when the car is cold the car jolts from 2nd to 1st, and when I kick down to accelerate there is a violent jolt until the car warms up, then all is ok. Has anyone had this problem and if so is there a cure?
01-31-2011, 07:31 PM
#2
Member
Join Date: Nov 2006
Location: Charlotte, N.C.
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
06 CLS500, 04 Tahoe, 04 Infiniti G35 Sedan, Boeing 737
How many miles? Has the tranny fluid been changed? I have read that the valvebodys in the 722.9 transmission, if you have one of those, is prone to valvebody issues. I have a 2006 CLS500 and mine is acting up. No problems other than downshifting issues though. Lots of 2006 CLS500's owners have reported shifting issues.....
Jeff
Jeff
01-14-2012, 03:25 PM
#3
Newbie
Join Date: Jan 2012
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2006 E500 RWD
722.9 tranny issues 06' e 500
I can tell you know its probably the circlips (snap rings) and disc springs need to be replaced. This is the exact problem I have with my 06' e500. The dealer wants $600 parts and $3000 labor. Good luck and let me know what happens
08-07-2012, 11:55 AM
#4
Newbie
Join Date: Dec 2011
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
CLS500
Hello,
My '06 CLS500 with about 58k miles is also experiencing the exact same thing. Is it important to fix right away or can it wait? Will waiting cause more damage? Do you know if this would be covered in a extended warranty?
My '06 CLS500 with about 58k miles is also experiencing the exact same thing. Is it important to fix right away or can it wait? Will waiting cause more damage? Do you know if this would be covered in a extended warranty?
