Cls ESP/ABS/BRAKE HELP !
03-11-2013 | 11:13 AM
#1
Thread Starter
Newbie
Joined: Mar 2013
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
From: Dubai
cls350 2005
Cls ESP/ABS/BRAKE HELP !
Hi all,
I own a Cls350 05' model in Dubai and i have been getting a very loud humming sound from the left front wheel. I checked it up at a mechanic store and they told me that my wheel bearing must be replaced. So i purchased 2 pieces of the bearing at a original mercedes store and went back to him for installation.
After 2 hours he calls me and tells me the car is done, i drive it for 10 seconds and then i get all sorts of ESP DEFECTIVE, SERVICE BRAKE VISIT WORKSHOP, ABS notifications on my dashboard and the steering became so heavy. I drove straight back to him, and he says he has done thousands of bearings and he is 100% sure he did it correct. He did not remove the break calipers, he moved the whole break a side and worked on the bearing by itself.
Before i replaced the bearing it was normal and running great, this is the 1st time.
He re-opened it, and cleaned the sensors and made sure everything was put into place, and 2nd test got the same problem. I also do not want to take it to the dealer because they will just suck money for nothing.
Please help me i realy dont know what to do.
I own a Cls350 05' model in Dubai and i have been getting a very loud humming sound from the left front wheel. I checked it up at a mechanic store and they told me that my wheel bearing must be replaced. So i purchased 2 pieces of the bearing at a original mercedes store and went back to him for installation.
After 2 hours he calls me and tells me the car is done, i drive it for 10 seconds and then i get all sorts of ESP DEFECTIVE, SERVICE BRAKE VISIT WORKSHOP, ABS notifications on my dashboard and the steering became so heavy. I drove straight back to him, and he says he has done thousands of bearings and he is 100% sure he did it correct. He did not remove the break calipers, he moved the whole break a side and worked on the bearing by itself.
Before i replaced the bearing it was normal and running great, this is the 1st time.
He re-opened it, and cleaned the sensors and made sure everything was put into place, and 2nd test got the same problem. I also do not want to take it to the dealer because they will just suck money for nothing.
Please help me i realy dont know what to do.
Last edited by ayyecaramba; 03-11-2013 at 11:18 AM.
