Need some help, ASAP please, guys..
Thread Starter
Super Member
Joined: Nov 2008
Posts: 620
Likes: 16
CLS500 M113
Need some help, ASAP please, guys..
For the 2nd time in as many weeks, my car did not move when put into Drive or Reverse.
Revs, but no movement.
When I started her, I did get an ESP warning, a runflat indicator inoperative and a Service Brake visit Workshop warning.
Put her off for 2 minutes, started again, and all was well.
I did do about 75 miles of driving in heavy traffic today and to think of it, the other time it happened, the car was used extensively.
No jerkiness, no bumps, thuds, just creamy smooth changes...
what could this possibly be?
I have read through many, many threads, but nothing definitive or conclusive...there..
Revs, but no movement.
When I started her, I did get an ESP warning, a runflat indicator inoperative and a Service Brake visit Workshop warning.
Put her off for 2 minutes, started again, and all was well.
I did do about 75 miles of driving in heavy traffic today and to think of it, the other time it happened, the car was used extensively.
No jerkiness, no bumps, thuds, just creamy smooth changes...
what could this possibly be?
I have read through many, many threads, but nothing definitive or conclusive...there..
Out Of Control!!
Joined: Jul 2003
Posts: 15,901
Likes: 4,630
From: North Scottsdale, AZ
'71 Pinto
Definitive diagnose pull code with MB DAS. To start, check electrical plug to ECM if fine, “may” be input/internal speed sensor in which case TCM needs replacement.
