Carbon fiber interior retrofit
Thread Starter
Junior Member
Joined: Jun 2010
Posts: 24
Likes: 0
From: bahrain
AMG gts
Carbon fiber interior retrofit
Hello
Is there any vendor who sells carbon fiber interior trim for the amg gt? I've been searching but found nothing
If any one can help finding the part numbers so that I can order them thru the dealership
Is there any vendor who sells carbon fiber interior trim for the amg gt? I've been searching but found nothing
If any one can help finding the part numbers so that I can order them thru the dealership
Member
Joined: May 2018
Posts: 194
Likes: 27
From: Connecticut
AMG GT
Try getmercedesparts.com ed was very helpful when I was looking for parts
MBWorld Fanatic!
Joined: Mar 2006
Posts: 4,005
Likes: 711
From: ATLANTA
R Nine T
Newbie
Joined: Feb 2018
Posts: 12
Likes: 7
From: Seattle, WA
AMG GTC
I made the mistake of ordering without the CF trim. It ended up costing me more than twice the cost of the CF option to buy the OEM CF trim parts individually. Still worth it though, they are a massive improvement on the flat-gray plastic. I found a place locally that was able to track these down and install them (installation was cheap at least).
You need three pieces:
1. Center air vent surround
2. Center console/shifter surround
3. Cup holder assembly
I missed the last on in my first order, but the sliding bit over the cup-holders is not part of piece 2 and is a complete unit. One more tip: the CF and the silver or black trim come together on a single piece. If you have black accents in the rest of your car, you need to get the matte CF parts with black trim. If you have the silver accents, you need the gloss CF with silver trim.
You need three pieces:
1. Center air vent surround
2. Center console/shifter surround
3. Cup holder assembly
I missed the last on in my first order, but the sliding bit over the cup-holders is not part of piece 2 and is a complete unit. One more tip: the CF and the silver or black trim come together on a single piece. If you have black accents in the rest of your car, you need to get the matte CF parts with black trim. If you have the silver accents, you need the gloss CF with silver trim.
MBWorld Fanatic!
Joined: Aug 2008
Posts: 2,498
Likes: 222
Porsche guy who drives SL63 w/ perf pkg AND perf suspension
you should take all the parts off and have them covered in cf try https://www.carbonsignature.com/
