Front plates on GTR
#1
Front plates on GTR
First post, really enjoying the forum. Great information. Appreciate everyone's contributions.
Did not want to drill bumper, but wanted to be able to place a plate as needed.
I did order a skene mount. It will work centrally with the medium and long platforms, however, it is really not and on/off type of Mount.
The bracket on the attached images are from carbonio. They are for the Ferrari waffle grill. I have contacted them to see if they have a mount with wider spacing of the brackets that can possibly sit beneath the Mercedes 3 prong. Placement and removal takes about 10 seconds.
Did not want to drill bumper, but wanted to be able to place a plate as needed.
I did order a skene mount. It will work centrally with the medium and long platforms, however, it is really not and on/off type of Mount.
The bracket on the attached images are from carbonio. They are for the Ferrari waffle grill. I have contacted them to see if they have a mount with wider spacing of the brackets that can possibly sit beneath the Mercedes 3 prong. Placement and removal takes about 10 seconds.
#3
Member
Joined: Jun 2008
Posts: 104
Likes: 30
From: Metro Vancouver Area
19 AMG GT R, 20 Porsche Cayenne
This is my solution after trying many different ways. It’s not an on/off option but works great so far. I use a soft silicon plate holder purchased from amazon and then a few cable ties.
Seven Sparta 2pack License Plate Frame Silicone Universal American Canada License Plate Holder Rust-proof & Rattle-proof (black)
The following users liked this post:
vpr071 (02-13-2020)
#4
First post, really enjoying the forum. Great information. Appreciate everyone's contributions.
Did not want to drill bumper, but wanted to be able to place a plate as needed.
I did order a skene mount. It will work centrally with the medium and long platforms, however, it is really not and on/off type of Mount.
The bracket on the attached images are from carbonio. They are for the Ferrari waffle grill. I have contacted them to see if they have a mount with wider spacing of the brackets that can possibly sit beneath the Mercedes 3 prong. Placement and removal takes about 10 seconds.
Did not want to drill bumper, but wanted to be able to place a plate as needed.
I did order a skene mount. It will work centrally with the medium and long platforms, however, it is really not and on/off type of Mount.
The bracket on the attached images are from carbonio. They are for the Ferrari waffle grill. I have contacted them to see if they have a mount with wider spacing of the brackets that can possibly sit beneath the Mercedes 3 prong. Placement and removal takes about 10 seconds.
#6
First post, really enjoying the forum. Great information. Appreciate everyone's contributions.
Did not want to drill bumper, but wanted to be able to place a plate as needed.
I did order a skene mount. It will work centrally with the medium and long platforms, however, it is really not and on/off type of Mount.
The bracket on the attached images are from carbonio. They are for the Ferrari waffle grill. I have contacted them to see if they have a mount with wider spacing of the brackets that can possibly sit beneath the Mercedes 3 prong. Placement and removal takes about 10 seconds.
Did not want to drill bumper, but wanted to be able to place a plate as needed.
I did order a skene mount. It will work centrally with the medium and long platforms, however, it is really not and on/off type of Mount.
The bracket on the attached images are from carbonio. They are for the Ferrari waffle grill. I have contacted them to see if they have a mount with wider spacing of the brackets that can possibly sit beneath the Mercedes 3 prong. Placement and removal takes about 10 seconds.
Trending Topics
#8
Junior Member
Joined: Feb 2019
Posts: 43
Likes: 30
From: Vancouver
2020 AMG GTR, 2016 Porsche 911 GTS, 2019 Porsche Macan S, 2019 Audi S5 Sportback
First post, really enjoying the forum. Great information. Appreciate everyone's contributions.
Did not want to drill bumper, but wanted to be able to place a plate as needed.
I did order a skene mount. It will work centrally with the medium and long platforms, however, it is really not and on/off type of Mount.
The bracket on the attached images are from carbonio. They are for the Ferrari waffle grill. I have contacted them to see if they have a mount with wider spacing of the brackets that can possibly sit beneath the Mercedes 3 prong. Placement and removal takes about 10 seconds.
Did not want to drill bumper, but wanted to be able to place a plate as needed.
I did order a skene mount. It will work centrally with the medium and long platforms, however, it is really not and on/off type of Mount.
The bracket on the attached images are from carbonio. They are for the Ferrari waffle grill. I have contacted them to see if they have a mount with wider spacing of the brackets that can possibly sit beneath the Mercedes 3 prong. Placement and removal takes about 10 seconds.
#9
https://carbonio.com/collections/lic...se-plate-mount
Easy to keep in trunk in case you "forget to replace after the car show/concourse." Literally 10 seconds.
J
The following 2 users liked this post by Scrubs02:
California John (07-12-2019),
Vancrypto (07-12-2019)
#10
Junior Member
Joined: Feb 2019
Posts: 43
Likes: 30
From: Vancouver
2020 AMG GTR, 2016 Porsche 911 GTS, 2019 Porsche Macan S, 2019 Audi S5 Sportback
https://carbonio.com/collections/lic...se-plate-mount
Easy to keep in trunk in case you "forget to replace after the car show/concourse." Literally 10 seconds.
J
Easy to keep in trunk in case you "forget to replace after the car show/concourse." Literally 10 seconds.
J
The following users liked this post:
Scrubs02 (08-31-2019)
The following 2 users liked this post by Scrubs02:
California John (09-01-2019),
Vancrypto (08-31-2019)
#12
Member
Joined: Oct 2020
Posts: 95
Likes: 21
From: Vancouver
2020 AMG GTC, 2021 Macan GTS, 2021 Golf GTI
This is my solution after trying many different ways. It’s not an on/off option but works great so far. I use a soft silicon plate holder purchased from amazon and then a few cable ties.
Seven Sparta 2pack License Plate Frame Silicone Universal American Canada License Plate Holder Rust-proof & Rattle-proof (black) https://www.amazon.ca/dp/B07LF93Q3P/..._pJbkDb2KHFY1F
Last edited by sodhigtc; 03-18-2021 at 08:04 PM.
#13
https://eosplates.com/collections/me...23978846945380
https://mbworld.org/forums/coupe-roa...ml#post7321619
#14
Member
Joined: Oct 2020
Posts: 95
Likes: 21
From: Vancouver
2020 AMG GTC, 2021 Macan GTS, 2021 Golf GTI
Less complicated: License Plate Holder into Front Tow Hook:
https://eosplates.com/collections/me...23978846945380
https://mbworld.org/forums/coupe-roa...ml#post7321619
https://eosplates.com/collections/me...23978846945380
https://mbworld.org/forums/coupe-roa...ml#post7321619
The following users liked this post:
mun802 (03-19-2021)
#15
#16
I use the sto n sho. No holes or drilling into bumper, can quickly release and replace when needed. I have it, use it and recommend it.
STO N SHO Removable Quick-Release Front License Plate Bracket
STO N SHO Removable Quick-Release Front License Plate Bracket
The following users liked this post:
MBNRG (05-05-2021)
#17
I use the sto n sho. No holes or drilling into bumper, can quickly release and replace when needed. I have it, use it and recommend it.
STO N SHO Removable Quick-Release Front License Plate Bracket
STO N SHO Removable Quick-Release Front License Plate Bracket
#18
IMO the best front plate option for our cars.
I can take some pics next time I take the car out.
#20
MBWorld Fanatic!
Joined: Oct 2020
Posts: 1,184
Likes: 880
From: Arizona
Bentley Continental GT; AMG GT
I use the sto n sho. No holes or drilling into bumper, can quickly release and replace when needed. I have it, use it and recommend it.
STO N SHO Removable Quick-Release Front License Plate Bracket
STO N SHO Removable Quick-Release Front License Plate Bracket
#21
I use the sto n sho. No holes or drilling into bumper, can quickly release and replace when needed. I have it, use it and recommend it.
STO N SHO Removable Quick-Release Front License Plate Bracket
STO N SHO Removable Quick-Release Front License Plate Bracket
If on GT R, where did you install to avoid possible interference with the Active Aero?