Driver’s door won’t lock!
#1
MBWorld Fanatic!
Thread Starter
Join Date: Jun 2014
Location: New York, NY
Posts: 1,895
Received 412 Likes
on
288 Posts
W463 G550 / C190 GTC //prev: W204 C63 507 / R170
Driver’s door won’t lock!
Does anyone know if this can be fixed by just removing the exterior door handle, which is easy to do?
I noticed the door lock/unlock pin no longer moved up/down. At first the door still locked though. Now it no longer locks. I can hear the actuator motor working.
I wonder if this was caused by the PPF installers when they removed the door handle? Although it worked for a while after the install.
I noticed the door lock/unlock pin no longer moved up/down. At first the door still locked though. Now it no longer locks. I can hear the actuator motor working.
I wonder if this was caused by the PPF installers when they removed the door handle? Although it worked for a while after the install.
#4
MBWorld Fanatic!
Thread Starter
Join Date: Jun 2014
Location: New York, NY
Posts: 1,895
Received 412 Likes
on
288 Posts
W463 G550 / C190 GTC //prev: W204 C63 507 / R170
Actuator rod that connects to door handle to the interior pin was bent — most probably the PPF installer, although can’t be sure, as it worked for a while.
The following users liked this post:
UCIMBZ (01-04-2020)