Adjusting the GTR Pro rear wing
#3
Senior Member
t25 or t30, I believe....
#4
MBWorld Fanatic!
Join Date: Oct 2020
Location: Arizona
Posts: 1,184
Received 877 Likes
on
452 Posts
Bentley Continental GT; AMG GT
Hi Oparque
That is a regular Torx screw. It is neither a Torx plus nor a security Torx
A security Torx will have a pin in the center like this:
A Torx pattern compared to a Torx Plus pattern:
I cannot guess the size by looking at a pic of the bolt.
All the Best,
That is a regular Torx screw. It is neither a Torx plus nor a security Torx
A security Torx will have a pin in the center like this:
![](https://cimg9.ibsrv.net/gimg/www.mbworld.org-vbulletin/1001x1001/51pxmihs8fl_sl1001__3b5103cd322ca84157c66a3c35801e673d6e695d.jpg)
A Torx pattern compared to a Torx Plus pattern:
![](https://cimg3.ibsrv.net/gimg/www.mbworld.org-vbulletin/643x345/torxplus_a0b962d697302b8c57cb91208d9ea3e19cf2cddd.gif)
I cannot guess the size by looking at a pic of the bolt.
All the Best,
The following users liked this post:
thebishman (03-11-2022)
#7
If your wing doesn't want to adjust through the full 10 degrees, see this post:
https://mbworld.org/forums/coupe-roa...ml#post8496655
https://mbworld.org/forums/coupe-roa...ml#post8496655